GE Voluson Swift Instructions For Use Manual page 21

Symbol
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Meaning
This indicates the approximate weight of the system including its
safe working load in kilograms.
70 kg (for 18.5inch monitor) / 72 kg (for 21.5 inch monitor)
Dangerous electric voltage.
Indicates a connector that allows for input only.
Indicates a connector that allows for in- and output.
Connect the monitor cable to this connector (One cable used for
power, one cable used for signal).
Indicates a DVI/VGA output connector.
Indicates an S-Video output connector.
Indicates the power connection for the lift cylinder
Pinch point
Watch your hands and fingers when adjusting the monitor. Keep
hands clear of openings.
Every system has a unique marking for identification, the Unique
Device Identification (UDI) Label. The UDI label consists of a
series of alpha-numeric characters and barcode which uniquely
identify the Voluson™ series system as a medical device
manufactured by General Electric. The UDI marking is part of the
product labeling which can be found at the back of the ultrasound
system. Scan or enter the UDI information into the patient health
record as required by country-specific laws.
Electronic instructions for use To indicate on product or product
packaging that relevant information for use of the product is
available in electronic form rather than, or in addition to, printed
paper form.
This symbol indicates suitable modes/settings for lung
examination.
Safety
Reference
GE crafted symbol
IEC 60601-1; IEC
60417-5036
IEC TR 60878-5034,
IEC60417-5034
IEC TR 60878-5035,
IEC60417-5035
IEC 60417
IEC 60417
GE crafted symbol
GE crafted symbol
GE crafted symbol
based on IEC 60601-1;
ISO 7010-P001 and
ISO 3864-1,
FDA 21 CFR 830
ISO 7000-3500
GE crafted symbol
2-7