Indicators; Fixing An Indicator; Exiting Indicator Mode - GE Voluson Swift Instructions For Use Manual

Image management

7.3.3 Indicators

Fixing an indicator

Exiting Indicator Mode

7-10
Figure 7-3 Indicators menu - example
By pressing Abc button and then selecting indicator button on the screen:
•
arrow (Small, Medium or Big))
•
hand (Small, Medium or Big)
1. Switch on the indicator function. The last selected indicator appears in the middle of the
annotation area. Active indicators are green.
2. Change the type of indicator (if wanted).
3. Position the indicator with the trackball.
4. Rotate the indicator (if wanted) with the rotary encoder.
5. Store the indicator with the
white.
6. To set a new indicator repeat steps 1-5. When the trackball is moved the next indicator
appears.
7. To delete an indicator press
Clear to delete all fixed indicators.
Indicator Mode can be exited directly, indirectly or through timeout.
Set key (right or left trackball button). The indicator turns
Delete Last to delete the last fixed pointer or Delete All or
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4