Text Groups; Workflows; Entering A Single Word Or Text String; Editing An Existing Word Or Text String Of A Text Key - GE Voluson Swift Instructions For Use Manual

Fixed Mode: not flashing
Active Mode: flashing
Invisible Mode: hidden

7.3.2.3 Text Groups

Group Move/Word Wrapping

7.3.2.4 Workflows

Entering a single word or text string

Editing an existing word or text string of a Text key

Creating a small list / Editing a small list
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
In this state the cursor itself can be positioned to select a new text position or a
current word or text group for editing. When text entering is started or an existing
text is selected, state 2 (Active Mode) is activated and the cursor starts flashing
In this state the cursor and the text will be positioned together, the current green
text hangs on the cursor. With
yellow and state 1 (Fixed Mode) is activated again.
If the text cursor is moved out of the annotation area into the onscreen area it is
hidden and the system cursor appears in the onscreen area to operate/select the
screen controls.
If the system cursor is moved into the annotation area again the text cursor appears
on the position where the system cursor passed the annotation boundary and the
previous state 1 or 2 is selected again.
There is a group concept behind the entered text:
All entered words which are fixed with
marked by manual placement of the cursor. Pressing
next line where typing can be continued. The multiple lines entered via
annotation group. The whole group of words can be moved with the trackball. When moving
the text cursor over a fixed group (yellow font) the font color turns to green and the group can
be activated for editing/positioning with
•
If no blank is entered: automatically Group move is activated. If the group position
reaches the left border no text entry is possible
•
If a blank is entered: automatically Word Wrapping is activated and the next word
separated by the blank is wrapped to the next line. When the bottom line is reached,
word wrapping is not possible, only Group move can take place.
1. Select an empty Text button with the system cursor and press
and the text cursor appear in the middle of the text field and also the buttons to create a
small list (first key enabled and others grayed).
2. Enter a word or text string (max. 24 characters).
3. Select the next Text button and continue that way.
4. If more than 20/40/60 entries are needed, change to 2nd/3rd/4th page.
1. Select the Text button to be edited with the system cursor and press
field appears, the existing text is highlighted.
2. To replace the whole text start text entering with the virtual keyboard (the highlighted
word will be deleted) or place the text cursor onto the desired text position to correct the
text.
For more information see 'Annotation' on page 11-11.
Set the text entry is fixed, the text color changes to
Set belong to one group. The beginning of a group is
Return brings the cursor down to the
Set or by typing a character on the virtual keyboard.
Image management
Return form the same
Set . The text entry field
Set . The text entry
7-9