Image Markers; Export From The Clipboard; Move Clipboard Images; Delete From The Clipboard - GE Voluson Swift Instructions For Use Manual

Archive

Export from the clipboard

Note

Move clipboard images

Note

Delete from the clipboard

Note
9.5.3 Saving Files to Archive

9.5.4 Image markers

Cine display
Export
Delete
Reload
Move
Added to worksheet
Tool tip
9-22
Export to mark an image for export onto an external device (multiple selections are
1. Press
possible) or for sending by email (if configured). The export index appears in the lower,
lefet hand corner of the image.
2. The export dialog will appear after pressing the
exit the Exam Review mode.
The export index mark will be deleted after ending the exam or completing the export.
With the Move function the order of the clipboard thumbnails (with all their image markers) can
be changed. This function is only available when more than one image exists.
1. Long Press on the clipboard icon to activate ability to move and reorder images.
2. Use the cursor to move the selected image to any position on the clipboard.
2.1.
Press Cancel to stop moving the image.
2.2.
Press Insert to move the image to the selected position.
If any blank slots are in between, the inserted image will be automatically placed behind the
last clipboard image.
Select the desired image on the clipboard and press
mark, a red cross, apprears across the image.
The image(s) will be deleted after ending the exam. There will be no confirmation dialog.
In Standard Configuration, the images and cines on the clipboard are automatically saved to
Archive upon ending an exam.
The thumbnails at the clipboard have different image markers.
Through Access Cine
Symbol
Bitmap Cine Symbol
Green arrow on the bottom left corner of the image.
If the export process has not yet been performed, the marker appears.
If the image has already been exported, the marker disappears.
Images marked for deletion have a red cross across the image.
Reloaded images have a green frame around the image.
Images marked to move have a red frame around the image.
When an image is added to the worksheet with a Px-button the image has a green check
mark.
While the cursor is positioned over a clipboard-image, the acquisition mode of this image
is shown.
[start to Export] button on the top bar or
For more information see 'Export' on page 9-8. .
Delete to mark for deletion. The deletion
Turquoise bar with red marker.
•
White triangle: Rot. Cine (Render Image)
•
Yellow triangle: Trans. Cine (Render Image)
•
Green triangle: Trans. Cine (Slice Image)
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4