Print; Upload To Trice (Dicom Send); Email Send - GE Voluson Swift Instructions For Use Manual

9.2.1.1 Upload to Trice (DICOM Send)

9.2.1.2 Email Send

Email Send
Sending data

9.2.2 Print

Note
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Selected data is sent to the DICOM destination selected in the DICOM Config Dialog. If no
DICOM destination is selected in the DICOM Config Dialog, a dialog appears where the
destination can be seleted within a drop down menu with available destinations.
It is possible to send data via e-mail.
•
Send to
•
•
•
All recipients with an included email address at the
Patient ID menu are preselected. If no email address is
entered, an edit button appears. Selecting this button
opens the corresponding dialog.
•
Options
•
•
The last selection shall be stored for the next Email Send.
Cc An additional email recipient can be added. If no recipient
is selected, the "Cc" changes to "To"
Subject
Message
Enter a message or edit the previously stored one.
Subject & Message A default subject and message (configured in the email
system setup) can be entered by clicking
deletes the subject and the message input field.
1. Select the data to send. The Email Send window appears.
2. Select the sending criteria (receiver, options,...) and type in a message if desired.
Send to send the data or Cancel to cancel the process.
3. Press
It is possible to print US data. Therefore select
Although the menu looks the same as the menu in System Setup, this Printer Settings menu is
solely for print jobs initiated with the Px buttons or from Archive. If you want to edit printer
settings for print jobs initiated with the End Exam button, please refer to 'Button Configuration'
on page 11-34.
Patient
Performing physician
Referring physician
Sonographer
Request a Read Receipt
Request a Delivery Receipt
Send a Copy to me
Print . The printing dialog appears.
Archive
Default . Clear
9-7