Scan Assistant Measurement Menu; Sonolyst - GE Voluson Swift Instructions For Use Manual

Image management
Controls
List
Groups
Items
Measurements
Pause

Scan Assistant Measurement Menu

SonoLyst

7-4
Select the desired list.
Select the desired group.
Select the desired item.
All measurements available for the selected item are displayed.
It is also possible to select the desired cine by rotating the control or by using the
trackball (it
measurements to the selected point while
stops the active measurement.
Pauses Scan Assistant during an exam. No selections are possible.
If an item is linked to an Image Analysis and the system finds a depending plane, only the
relevant (linked) items are displayed on the touch panel. Instead of the group area all plane
depending criteria with pictogram are displayed.
The items linked to Image Analysis are labeled accordingly. If the filter button
items which match the depending image are displayed, otherwise all items are displayed.
It is also possible to switch the Image Analysis plane detection on and off.
As soon as the measurement is started, the measurement menu displaying the item name,
progress bar and description appears on the screen. All required measurements for the active
items are listed and can be selected. It is also possible to select the desired cine by rotating
the control or by using the trackball (if
sets the measurement to the selected point while
stops the active measurement.
If an item is linked to an Image Assessment and the system found a depending plane, then
only the relevant (linked) items shall displayed on the right panel.
Cine is active). When Calc is active, Set on the trackball sets the
Cine is active). When Calc is active, Set on the trackball
Magnifier activates the magnifier. Cancel
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
Magnifier activates the magnifier. Cancel
is on, only
5831612-100 Revision 4