Installing A Demo- Or Permanent Key - GE Voluson Swift Instructions For Use Manual

System Setup
Serial Number
Demo Key
Permanent Key
4D View License

Installing a Demo- or Permanent Key

Remark
11-18
P Permanent
d disabled
Shows the serial number of the System.
This field is used to enter and show the demo key (all options are available for a
certain period of time) from OKOS.
This field is used to enter and show encoding key for permanent available options.
Export Options:
1. Select all connected USB drives from the
2. Choose
3. If a .lic file is scelected,
pressing the
4. When the selected license file is valid, the file on the USB drive will be replaced
by a new file with the same name and the options from the device.
5. Close the message box and pop up the
OK button on the screen.
1. Position the cursor inside the input field desired and press
2. If one exists, clear/edit the current key code.
3. Enter the encrypted serial code with the keyboard and then click on
will be checked.)
Save & Exit button.
4. Click the
•
After activating a key code, restart the system.
•
To Exit the System Setup without saving, click the
Option is permanently activated (purchased).
Option is disabled.
Figure 11-11 Options
Open or Cancel button.
Open button is enabled. Close the Open File dialog by
Cancel button on the screen.
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
Look in drop down menu list.
Open File dialog again by pressing the
Set .
Submit (The code
Exit button.
5831612-100 Revision 4