Omniview Volpre Menu - GE Voluson Swift Instructions For Use Manual

OmniView VolPre Menu

Settings
Method
VCI Thickness
FPS Opt.
Quality
Vol. Angle
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Figure 8-11 OmniView Premode Controls
Select the desired user folder.
Four tracking line methods are available:
•
Line : straight line
•
Curve : curved line
•
Trace : freeform line
•
Polyline : freeform line from point to point
Select the desired thickness (mm).
On/off selection.
This control improves the resolution by reducing the frame rate. Respectively it
reduces the resolution by increasing the image frame rate.
Adjust the Volume Angle.
3D and 4D Mode
8-19