Whitelisting; Decrypt - GE Voluson Swift Instructions For Use Manual

System Setup
Password
Recovery key
Unlock

Decrypt

11.2.2.6 Whitelisting

Note
Controls
Whitelisting active
Info badge
Password
Verify Password
11-22
Enter the password.
Press the button to the recovery key dialog. Enter the Recovery key.
Press to unlock the disk. If the password or the recovery key are incorrect an error
message appears.
Note If the correct USB device with unlock key is connected in the meantime then the
Unlock button unlocks the disk.
Disk decryption is possible in the Service tools using the
information see 'Service' on page 11-17.
During the decryption process the Tab Disk encryption displays the following content.
Whitelisting is an option. Only if the option is set, the tab Whitelisting is visible.
Whitelisting prevents the system from installing unwanted Software.
Whitelisting can be used, the user has to define a password with at least 8 characters.
Before
Whitelisting is activated, a printer can only be installed after the user confirms it with the
When
Whitelisting password.
Figure 11-13 Activate Whitelisting (left image), deactivate Whitelisting (right image)
The Info badge displays the current state of the Whitelisting including a short
description how to continue.
The entered password is not visible and has a minimum of 8 characters.
Enter the same password as in
Decrypt Disk button. For more
Password to activate Whitelisting.
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4