Probe Assessment Tool - GE Voluson Swift Instructions For Use Manual

5.6 Probe assessment tool

Diagnose Probe
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
1. Turn the system on
2. Selecte any probe yu want to run the diagnostic on and activate it.
3. Open the probe menu and select the probe diagnostic test.
4. A window will pop up, select "Start Test" to execute the test.
5. After completion, the result will show as Pass or Fail as below figures.
Probes and Biopsies
5-31