Network; Network Adapter Configuration; Wlan Configuration - GE Voluson Swift Instructions For Use Manual

Delete
Retry all
Delete all
Close
Show information
Restart Transfer

11.2.3.2.2 Network

TCP/IP Configuration

Network Adapter Configuration

Note

WLAN Configuration

Info
Note
Note
Note
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Delete the selected exams.
Retry all exams.
Delete all exams, including items that are currently in
Closes the
This button is enabled if a failed DICOM transfer is selected in the Queue list.
With this function more information about the failed DICOM transfer can be
requested. A window pops up. If the Image is stored in the archive the additional
Go to Archive is available. It opens the archive in Review Mode and the
button
failed image is shown.
It is possible to restart the transfer service by pressing
service is not started, the button is highlighted with two gray bars.
Edit the TCP/IP Settings as needed.
Network Adapter Configuration a dialog appears asking whether to
Before entering the
Yes ) or not (confirm with No ).
continue (confirm with
It is not recommended to change configurations without being familiar with this task.
Edit the Network Adapter Settings as needed.
The WLAN adjustments and hardware may differ in some countries. Please check the
requirements or talk to your local Online Center.
The WLAN Stick optionally provided by GE ULTRASOUND KOREA, LTD.
1. Make sure the WLAN adapter is plugged into a USB socket.
Enable Wireless Connection .
2. Check the box
Available networks are displayed.
3. Double-click the desired network.
4. Insert the network key.
In case you need further assistance, please contact a GE ULTRASOUND KOREA, LTD.
service technician.
Following controls must be selectable :
Queue Status window.
System Setup
wait status.
Restart Transfer . When the
11-31