Imaging Presets; Accessing The Presets Tab - GE Voluson Swift Instructions For Use Manual

11.2.4 Imaging Presets

Accessing the Presets tab

Presets
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Home button on the top-left corner of the screen.
1. Press the
System Setup .
2. Open the
Imaging Presets .
3. Select
Presets tab.
4. Select the
Preset folders and buttons can be moved, deleted, renamed and copied:
1. Select a probe from the drop down list.
The available folders and presets for 2D Mode will be displayed. Make sure that both a
preset folder and button is selected in order to display all available functions. If a volume
probe is selected, also the
2. Modify folders or presets:
Move
•
Select a folder or preset button. Keep the left or right trackball button (
to drag a folder or preset button from one position to another and release the
button or simply touch and drag using the touchscreen.
Copy
•
Select a folder or preset button. Press the left trackball button (
•
Move the trackball to the desired position and press the left or right trackball button
Paste ).
(
•
If the selected position is used for a different preset, a message window appears
asking if you really want to overwrite the preset or folder. Select
want to overwrite the preset or folder. If you want to overwrite it, you can either
overwrite the complete preset or only settings relevant for scan geometry.
Rename
•
Select a folder or preset button. Press the right trackball button (
•
Rename the folder or preset button.
Cut
•
Select a folder or preset button. Press the top trackball button (
•
Move the trackball to the desired position and press the left or right trackball button
Paste ).
(
Delete
•
Select a folder or preset button. Select the button
•
A message window appears asking if you really want to delete the folder or preset
button.
3. Logo:
Selete the desired type of language in the dropdown list.
•
fmf (Fetal medicine foundation)
•
iota (international ovarian tumor analysis)
4. Geometry change:
•
Tick the box if the scan geometry should not be changed when changing from one
preset to another in run mode.
3D/4D presets button will be available.
System Setup
Set ) pressed
Copy ).
No if you don´t
Rename ).
Cut ).
Delete .
Set
11-45