Detailed Setup - GE Voluson Swift Instructions For Use Manual

Overview
Save to Clipboard with Px
Save to Worksheet with Px
Confirm Scan Assistant Item with
Px
Export as JPG / MP4 with Px
Create Patient/Exam Folders
Use Px to send Email
Use Px for Recorder Control
DICOM
Tricefy
Print

Detailed Setup

2D Save
D/M Save
3D Save
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Copy image data from the monitor to the clipboard.
Save image data from the monitor to the worksheet.
It shall be able to confirm a current selected check item with Px (x=1,2,3).
Export the image or cine data with a P-key.
If this box checked, patient or exam folders are created.
Send image data by email. If this box is checked, all other configuration possibilities
are deactivated.
Use it as Recorder control. If this box is checked, all other configuration possibilities
are deactivated.
Send data to a DICOM destination (1-3). The drop down list contains all available
DICOM Store destinations.
Store or share the image/cine with a P-key. (Store transfers the image/cine into the
Tricefy™ cloud for saving in an archive while Share transfers the image/cine into
the Tricefy™ cloud for sharing with patients.)
This selection is only available when Tricefy™ is activated. Only then this option
Note
also occurs in the Detailed Setup.
Print data on Printer 1-3. The drop down list contains all available printers (DICOM
and other printers).
Automatic :
•
Saves data that is displayed on the screen.
•
Saves a single 2D image in Freeze Mode.
•
Saves Cine in Auto Cine Mode as defined in Auto Cine Menu.
•
Saves Cine according to the Max. Cine Length setting in Write Mode.
Single : Always saves single 2D images independent of the selected mode.
Cine : Always saves 2D Cine.
•
Saves Cine according to Max. Cine Length setting in Write- and Freeze - mode.
•
Saves Cine in Auto Cine Mode as defined in Auto Cine Menu.
Single : Saves single images containing both, current D/M data and current 2D data.
Cine : Saving 2 cines, one containing D/M data, the other containing 2D data.
Automatic :
•
Saves 3D Volume that is displayed on the screen.
•
Saves 3D and Rot. Cine in 3D Rot. Cine Mode.
•
Saves 3D Static without Rot Cine in normal 3D Mode.
Single Volume : Saves 3D Volume data.
Static + Calc Cine: Include a rot, Cine, if available.
Screenshot : Depending on the settings in the Archive Configuration Dialog either
TrueAccess or Screenshot / Multiframe is available.
Settings becomes available for detailed Email configuration.
System Setup
11-35