Omniview - GE Voluson Swift Instructions For Use Manual

3D and 4D Mode
VCI
2D:SRI
Quality
Vol. Angle
Mix
Save
B Mode Quality
3D Rotate
Init
XL
3D Orientation
Display formats
Gray/Tint Maps
Probe Orientation
Background
Info 2D Param
Orientation Help
VCI Render Mode 1 (basic)
VCI Render Mode 2 (mix)
Gray Transparency
Ref. Image
Volume Cine Menu

8.7.3 OmniView

Note
8-18
Switched on/off VCI and select the desired thinkness (mm).
Applies the filter to the rendered 2D image only.
This control improves the resolution by reducing the frame rate. Respectively it
reduces the resolution by increasing the image frame rate.
Adjusts the Volume Angle.
Adjusts value between the two selected render modes and gray threshold low of
3D images.
Saves the preset.
Switches the B Mode Quality on/off
Opens 3D Rotate menu.
Sets all transitions and rotations back to the initial acquisition mode.
Changes to wide format.
Rotates the 3D image by selecting one of the two toggle buttons
The selected icon is shown in green.
Selection of format controls.
The selected format is shown in green.
Select the desired Gray/Tint map.
Opens the Probe Orientation menu.
Adjusts the Background
Displays extended image information on the top right corner.
Shows the planes orientation in the volume.
Select the desired Render Modes.
page 8-27.
Adjusts the gray transparency.
Ref. Image is able to be selected with the left trackball key. All image dependent functions like
parallel shifts, rotations, etc. are applied to the selected reference image.
For more information see 'Volume Cine' on page 8-34.
OmniView is an option.
Obtain any plane from a 3D or 4D volume by simply drawing a line, curve, poly-line or trace
through a structure. This valuable technology enables views of even irregularly shaped
structures not attainable in 2D imaging.
Possible Acquisition Modes:
•
4D Real Time
•
3D Static
For more information see ' Render Modes ' on
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4