Connectivity; Activate Whitelisting - Workflow; Deactivate Whitelisting - Workflow - GE Voluson Swift Instructions For Use Manual

Activate
Cancel
OK
Whitelisting inactive
New Password
Change Password
Deactivate

Activate Whitelisting - Workflow

Note

Deactivate Whitelisting - Workflow

Note

11.2.3 Connectivity

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Activates Whitelisting. If
disabled.
Error messages appear, when
less than 8 characters long.
Press this button to cancel the add printer process.
Press OK to add printer. OK is disabled, when Password is empty.
An error message appears, if the entered
The entered password is not visible and has a minimum of 8 characters.
Press to change password. If the password change is successful, a message is
displayed.
Password are empty.
Error messages appear, when entering a wrong password,
Verify Password do not match or are less than 8 characters long.
Deactivates Whitelisting.
An error message is displayed, if the wrong password was entered.
Password and Verify Password .
1. Enter
2. Press Activate to activate Whitelisting.
3. Reboot the system to activate Whitelisting. After the device is restarted and the user is
installing a printer, a message box appears.
3.1.
Enter your Whitelisting password.
3.2.
OK to add a printer or cancel the process by pressing Cancel .
Press
If the device is not restarted and the user tries to install a printer, a message to reboot the
system appears.
1. Enter Password .
2. Press Deactivate to deactivate Whitelisting.
3. Reboot the system to deactivate Whitelisting.
If the device is not restarted and the user tries to install a printer, a message to reboot the
system appears.
Connectivity includes the sub menus:
•
Peripherals
•
Device Setup
•
Tricefy™
•
Button Configuration
•
Drives
Password or Verify Password are empty, Activate is
Password and Verify Password do not match or are
Change Password is disabled, if Password , New Password or Verify
Deactivate is disabled, if Password is empty.
System Setup
Password is incorrect.
New Password , and
11-23