Dicom - GE Voluson Swift Instructions For Use Manual

11.2.3.2.1 DICOM

DICOM Configuration
Controls
AE Title
Station Name
Retry Count
Retry Count Seq.
Retry Interval
Timeout (s)
Charater Set
Default
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
•
Archive
•
Network
DICOM is the abbreviation of Digital Imaging and Communications in Medicine. This is the
industrial standard for communication of images and other information between medical
devices on the network. Using the DICOM option, you can send or print images after
connecting your ultrasound equipment and PACS.
This dialog section is used to set up details of all of your DICOM target nodes (image servers).
Once you have set up a DICOM node properly, data can simply be transferred by selecting the
appropriate target node.
Figure 11-16 DICOM Configuration
Enter the AE (Application Entity) Title under which your DICOM application is known
to other DICOM applications (required). For information about the correct
setting, please contact your DICOM network administrator.
Enter the name of the hospital or institute.
Number of retries to establish a successful DICOM connection.
Retry count for sequential mode (only valid if
the selected destination). If the end number of
sending was not successful then the "problem" data set is marked as "failed" in the
DICOM Transfer Queue Status and the system continues sending the next image
data
Retry interval minutes.
Define a timeout interval.
Select desired language from a dropdown list consisting of ISO_IR 100 (Latin 1),
ISO-IR 101 (Eastern Europe), ISO_IR 126 (Greek), ISO_IR 138 (Hebrew), ISO_IR
144 (Cyrillic), ISO_IR 192 (UTF-8), ISO_2022 IR 87 (Japanese), GB18030
(Chinese).
Default values of
Send sequ. checkbox is checked for
Retry Count Seq. is reached and
Retry Count , Retry Count Seq. , Retry Interval , Timeout (s) are set.
System Setup
AE Title
11-25