Full System Configuration; Saving The Full System Configuration - GE Voluson Swift Instructions For Use Manual

Note

Full System Configuration

Saving the Full System Configuration:

Note
Remark
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
In case software version and user program version are not identical, one of the following
messages will be displayed:
•
When loading a Small Backup: "The current user programs are not compatible with this
software version".
•
When loading parts of a Small Backup: "The current user programs are not compatible
with this software version. Do you want to load the complete set of user programs?"
This can be solved by loading the latest available backup (Small Backup) which is compatible
with the software version.
Full System Configuration backup contains the following data:
The
•
Patient demographic and exam data (database containing the patient data and
measurements)
•
Archive image data (NOT available when saving to the internal hard disk )
•
User Settings (databases and files containing gray curves and the user settings.)
•
Image transfer settings (DICOM settings e.g., DICOM servers, AE Title, Station Name,
etc.)
•
Measure Setup Settings (user specific measure settings)
•
Voluson™ SWIFT / Voluson SWIFT+ settings (general settings such as language, time/
date format and the enabled options)
•
Windows Network Settings (network settings including the computer name)
•
Service platform (state of the service platform)
•
VP (additional system data)
All settings and patient data created since last full system configuration backup are NOT
backed-up! It is highly recommended to create a full system configuration backup of settings
and patient data regularly.
Save and the Save window is displayed.
1. Click
2. Choose the destination (e.g., Network Drive).
3. Enter a description.
4. If desired and possible, activate
This can be a large amount of data, up to 70 gigabytes!
Next and confirm with Yes to start the backup process.
5. Click
6. After copying the data, confirm the next message with
•
It is possible to store more than one backup on a destination. The backups reside in
subfolders of the main Fullbackup - folder found at the root of the drive (e.g.,
Z:\Fullbackup). DO NOT modify this directory structure or any files within, otherwise the
backup data cannot be restored. .
•
The Include Images " checkbox is only active, if destination Network Drive or Other drive
is selected.
•
Other drive is selected, the available drives (e.g., external USB-memory
If the destination
stick) can be chosen from the drop down list.
Include Images .
OK to reboot the system.
System Setup
11-41