Anatomical M-Mode (Amm); B-Flow; Amm Main And Sub Menu - GE Voluson Swift Instructions For Use Manual

2D Mode

6.2.5 Anatomical M-Mode (AMM)

Note
Using Anatomical M-Mode

AMM Main and Sub Menu

Note

6.2.6 B-Flow

6-12
Harm. Frequ.
Multi Frequency mode lets you downshift to the probe's
next lower frequency or shift up to a higher frequency.
Cine # Select the desired Cine #.
Anatomical M-Mode gives you the ability to manipulate the cursor at different angles and
positions. The M-Mode display changes according to the position of the cursor.
When AMM pre-mode is entered, the last used display format is activated. If the 2D user
program is changed, the display format saved in the use program is activated.
1. Select M-Mode.
AMM button.
2. Touch the
3. Adjust the AMM-cursor in the 2D single image.
2D/M run (left or right trackball button) to start AMM.
4. Press
5. Press the top trackball button to toggle between position and rotation of the AMM curser
pos / rot. ).
(
6. Adjust or rotate the cursor accordingly.
7. Press the small trackball buttons to select the different cursor lines
Freeze .
8. Press
General M-Mode buttons are described in 'M-Mode'
AMM rot AMM rotation
The AMM angle is determined by the virtual MM cursor line and the AMM cursor line. At 0°
both lines have the same position. The maximum rotation is 180°. The max. CW/CCW rotation
angle is limited (max. horizontal position on the screen), so the AMM-cursor is mirrored when it
is not top/bottom oriented. During the angle rotation the image is updated in real time.
B-Flow helps to visualize complex hemodynamics and highlights moving structures or blood. It
is visually intuitive when viewing blood flow, for acute thrombosis, parenchymal flow and jets. It
is a realistic (intuitive) representation of flow information, allowing to view both high and low
velocity flow at the same time.
AMM1 or AMM2 .
on page 6-11 .
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4