Store/Store3D - GE Voluson Swift Instructions For Use Manual

System Setup
STORE / STORE3D
Send sequ.
4D View default
DICOM Station default
ViewPoint Default
Options
11-28
Figure 11-17 STORE / STORE3D View
Edit the Store - Settings as needed.
•
Send sequ. is checked and
If
○
the
-
-
-
-
○
If the
server sequentially. This means that only one transfer is active to this server
at a time. If one transfer fails, all subsequent transfers are stopped until the
failed transfer succeeds or is removed from the queue. (Use for servers that
cannot handle multiple associations, or do not sort the images by Image
Number.)
•
If Send sequ. is not checked, up to 5 data sets can be transferred at the same
time. This means that transfer is faster. Images can arrive out of order in this
case. (Use for servers that have none of the limitations listed in the above
paragraph).
Loads the default settings for 4DView. The destination information must be entered
manually.
Loads the default settings for DICOM Station. The destination information must be
entered manually.
Loads the default settings for ViewPoint.
If options are checked, the system sends the data including DICOM tags.
(ViewName and ViewNumber, TransducerData, PixelSpacing)
Scan Assistant is activated :
The sequentially "send order" of the images (first, second ...) is derived
from the check item order as configured in the setup page (first item,
second item ...).
If more than one image is available on a check item the send order is
defined by the store - date (first stored, second stored ...).
If more than one checklist is available: order as configured in the setup
page
If more than one checklist group is available: order as configured in the
setup page
Images stored without check item: send order: date, after the checklist
items
Scan Assistant is deactivated it causes all data to be sent to this
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4