GE Venue 50 Basic Service Manual
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Medical Equipment
  5. Venue 50
  6. Basic service manual

GE Venue 50 Basic Service Manual

Hide thumbs Also See for Venue 50:
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Publication
Venue 50
Basic Service Manual
Direction Number: 5447566-100 English
Rev. 7
All Material Copyright © 2013-2015 by General Electric Company Inc.
All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for GE Venue 50

Summary of Contents for GE Venue 50

  • Page 1 Technical Publication Venue 50 Basic Service Manual Direction Number: 5447566-100 English Rev. 7 All Material Copyright © 2013-2015 by General Electric Company Inc. All Rights Reserved.
  • Page 2 Product Information This Manual covers the software version of R4.x.x for Venue 50 ultrasound system. P.O. Box 414, Milwaukee, Wisconsin 53201 U.S.A. (Asia, Pacific, Latin America, North America) GE Ultraschall Deutschland GmbH & Co. KG Beethovenstrasse 239 Postfach 11 05 60 D-42655 Solingen GERMANY TEL: 49 212.28.02.208;...
  • Page 3 MyWorkshop/ePDM (GE electronic Product Data Management). If you need to know the latest revision, contact your distributor, local GE Sales Representative or in the USA call the GE Ultrasound Clinical Answer Center at 1 800 682 5327 or 1 262 524 5698.
  • Page 4 Important Precautions Translation policy Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 5 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 6 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 7 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 8 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 9 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 11 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 13: Damage In Transportation

    GE personnel. In performing all electrical work on these products, GE will use its own specially trained field engineers. All of GE’s electrical work on these products will comply with the requirements of the applicable electrical codes.

  • Page 14: Omission And Errors

    No. 19 Changjiang Road Wuxi National Hi-Tech Dev. Zone Jiangsu P.R.China 214028 GE employees should use TrackWise to report service documentation issues. These issues will then be in the internal problem reporting tool and communicated to the writer. i-12 Venue 50 –...

  • Page 15: Service Safety Considerations

    For a complete review of all safety requirements, refer to Chapter 1 in the Service Manual. Venue 50 – Basic Service Manual i-13 5447566-100 English Rev. 7...

  • Page 16: Legal Notes

    The contents of this publication may not be copied or duplicated in any form, in whole or in part, without prior written permission of GE. GE may revise this publication from time to time without written notice. Trademarks All products and their name brands are trademarks of their respective holders.

  • Page 17: Table Of Contents

    Typical Users of the Proprietary Service Manual - - - - - - - - - - - - - - - - - 1-4 Venue 50 models covered by this manual - - - - - - - - - - - - - - - - - - - - - - 1-5...
  • Page 18 Contents in this section - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6 Receiving the Venue 50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7...
  • Page 19 Contents in this chapter- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2 Block Diagram and Theory Block Diagram of Venue 50 and Docking Station/Cart - - - - - - - - - - - - - 5-3 Chapter 6 — Service Adjustments...
  • Page 20 Standard GE tool kit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 21 Ultrasound Inspection Forms - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-34 Index Venue 50 – Basic Service Manual i-19...
  • Page 22 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 23: Chapter 1 - Introduction

    This chapter describes important issues related to safely servicing the ultrasound system and Docking Station/Cart. The service provider must read and understand all the information presented here before installing or servicing the units. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 24: Overview

    • ‘Lockout/Tagout (LOTO) Requirements’ on page 1-24 • ‘Returning Probes and Repair Parts’ on page 1-25 • ‘EMC, EMI and ESD’ on page 1-26 • ‘Customer Assistance’ on page 1-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 25: Manual Overview

    Manual Overview Manual Overview This manual provides installation and service information for the Venue 50 Ultrasound system and Docking Station/Cart. It is divided in ten chapters as shown below. Contents in This Manual The manual is divided into ten chapters.

  • Page 26: Typical Users Of The Proprietary Service Manual

    A quick way to the topic you’re looking for. Typical Users of the Proprietary Service Manual • GEHC Service Personnel (setup, maintenance, etc.) • GEHC Online Center Personnel • Licensed Hospital’s Service Providers Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 27: Venue 50 Models Covered By This Manual

    Manual Overview Venue 50 models covered by this manual Table 1-2: Venue 50 Model Designations Part Number Description Venue 50 5452256 Console Venue 50 5448623 Console with film Venue 50 5560851 Korean Console Venue 50 5561656 China Console NOTE: When not otherwise specified, the contents of this manual applies to all Venue 50 models.

  • Page 28: Important Conventions

    Important conventions, used in this document, are described next. Model designations This manual covers the Venue 50 Ultrasound systems listed in: ‘Venue 50 models covered by this manual’ on page 1-5. Icons Pictures, or icons, are used wherever they will reinforce the printed message.
  • Page 29 Notes are used to provide important information about an item or a procedure. NOTE: Be sure to read the notes; the information contained in a note can often save you time or effort. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 30: Standard Hazard Icons

    Standard hazard icons ELECTRICAL MECHANICAL RADIATION LASER HEAT PINCH NOTE: Even if a symbol isn’t used on the product or in this manual, it may be included for your reference. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 31 Tag and Lock Out Wear Eye Protection Hand Protection Foot Protection Wear Eye Protection Be sure to read the notes; the information contained in a note can often save you time or effort. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 32: Product Icons

    Date of manufacture Rating Plate Serial number Rating Plate ＳＮ ＳＮ Catalog Number Rating Plate ＲＥＦ ＲＥＦ Direct Current: For products to be Rating Plate powered from a DC supply 1-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 33 IEC Rating plate 878-02-03. General Warning. Various “CAUTION” - Dangerous voltage” (the Various lightning flash with arrowhead) is used to indicate electric shock hazards. Venue 50 – Basic Service Manual 1-11 5447566-100 English Rev. 7...
  • Page 34 Please contact an authorized representative of the manufacturer for information concerning the decommissioning of your equipment. 1-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 35 Venue 50 – Basic Service Manual 1-13 5447566-100 English Rev. 7...

  • Page 36: Labels Locations

    Labels Locations It is important to refer to the current revision of the Ultrasound system’s User Manual for a full list of product labels prior to servicing the system. 1-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 37: Safety Considerations

    Failure to comply with these precautions or with specific warnings elsewhere in this manual, violates safety standards of design, manufacture and intended use of the equipment. Venue 50 – Basic Service Manual 1-15 5447566-100 English Rev. 7...

  • Page 38: Human Safety

    DEATH, ARE PRESENT IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING. If the covers are removed from an operating Venue 50, some WARNING metal surfaces may be warm enough to pose a potential heat hazard if touched, even while in shutdown mode.
  • Page 39 WARNING sharp edges are encountered, the appropriate PPE should be used to reduce the risk of injury. Wear all PPE including gloves as indicated in the chemical WARNING MSDS. Venue 50 – Basic Service Manual 1-17 5447566-100 English Rev. 7...

  • Page 40: Mechanical Safety

    Do not move Docking Cart with big incline angle. CAUTION When using Docking Cart, avoid water and blood enter into CAUTION Docking Cart. Put peripherals in correct position to avoid Docking Cart CAUTION overload. 1-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 41 Prevent vibration damage by driving cautiously. Avoid unpaved roads, excessive speeds, and erratic stops or starts. If the Venue 50 system is on a docking cart, please take special care of the following: Make sure the Venue 50 be fixed well to avoid the console CAUTION falling down when moving Docking Cart.

  • Page 42: Electrical Safety

    • Both the system power cable and the power connector must meet international electrical standards Connecting a Venue 50 to the wrong voltage level will most WARNING likely destroy it. Probes Follow these guidelines before connecting a probe to the Ultrasound system: •...

  • Page 43: Battery Safety

    DO NOT solder a battery. • DO NOT connect the battery to an electrical power outlet. If the Venue 50 is not being used on a monthly basis, the WARNING battery needs to be removed during the lengthy non-use period.
  • Page 44 Store the battery in a temperature range between -5°C (23°F) and 50°C (122°F) • Upon receipt of the Venue 50 and before first time usage, it is highly recommended that the customer performs one full discharge/charge cycle. If the battery...

  • Page 45: Dangerous Procedure Warnings

    DEATH, ARE PRESENT IN THIS EQUIPMENT. USE EXTREME CAUTION WHEN HANDLING, TESTING AND ADJUSTING. If the covers are removed from an operating Venue 50, some WARNING metal surfaces may be warm enough to pose a potential heat hazard if touched, even while in shutdown mode.

  • Page 46: Lockout/Tagout (Loto) Requirements

    6. Control all stored and residual energy. 7. Verify isolation. All potentially hazardous stored or residual energy is relieved. Energy Control and Power Lockout for Venue 50. WARNING When servicing parts of the Ultrasound system where there is exposure to voltage greater than 30 volts: 1.

  • Page 47: Returning Probes And Repair Parts

    It is always possible during system failure and repair to lose patient data. GE is not responsible for the loss of this data. If PHI (Patient Healthcare Information) data needs to be sent to GE employees for service purposes, GE will ascertain agreement from the customer.

  • Page 48: Emc, Emi And Esd

    Compliance Venue 50 conforms to all applicable conducted and radiated emission limits and to immunity from electrostatic discharge, radiated and conducted RF fields, magnetic fields and power line transient requirements.

  • Page 49: Electrostatic Discharge (Esd) Prevention

    Always use non-conductive handles designed for the removal and replacement of ESD sensitive parts. All parts that have the potential for storing energy must be discharged or isolated before making contact. Venue 50 – Basic Service Manual 1-27 5447566-100 English Rev. 7...

  • Page 50: Customer Assistance

    5. Is the issue repeatable? 6. Imaging mode, probe, preset/application. 7. Media brand, speed, capacity, type. 8. Save image capture, cine loop. NOTE: Restart the application before resuming clinical scanning. 1-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 51: Phone Numbers For Customer Assistance

    Latin America Service 1-800-321-7937 Application Support 1-262-524-5698 Europe (OLC-EMEA) OLC - EMEA +49 (0) 212-2802-652 GE Ultraschall Deutschland Gmbh & Co. KG Phone: +33 1 3083 1300 Beethovenstrasse 239 Fax: +49 (0) 2122-8024-31 Postfach 11 05 60, D-42655 Solingen Germany...
  • Page 52 Introduction 1-30 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 53: Chapter 2 - Site Preparations

    Docking Station/Cart. Included are descriptions of the facility and electrical needs to be met by the purchaser of the units. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 54: Contents In This Chapter

    Site Preparations Overview Contents in This Chapter • ‘Overview’ on page 2-2 • ‘General Requirements’ on page 2-3 • ‘Facility needs’ on page 2-11 • ‘Environmental Dangers’ on page 2-19 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 55: General Requirements

    If the Ultrasound system is very cold or hot, do not turn on its CAUTION power until it has had a chance to acclimate to its operating environment. Table 2-1: Ultrasound system acclimate time Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 56 Ensure that the probe face temperature does not exceed the CAUTION normal operation temperature range. The Venue 50 system and probe connector is not waterproof. CAUTION Do not expose the device to water or any kind of liquid. Venue 50 – Basic Service Manual...
  • Page 57 (dim/bright) is recommended. Keep in mind that lighting controls and dimmers can be a source of EMI which could degrade image quality. These controls should be selected to minimize possible interference. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 58: Electrical Requirements

    Site Preparations Electrical requirements General requirements NOTE: GE requires a dedicated power and ground for the proper operation of its Ultrasound equipment. This dedicated power shall originate at the last distribution panel before the Ultrasound system. Sites with a mains power system with defined Neutral and Live:...
  • Page 59 General Requirements Site circuit breaker Power outage may occur. The Venue 50 requires a dedicated CAUTION single branch circuit. To avoid circuit overload and possible loss of critical care equipment, make sure you do not have any other equipment operating on the same circuit.

  • Page 60: Emi Limitations

    High Frequency (HF) surgery equipment • general AC/DC adapters The presence of a broadcast station or broadcast van may also cause interference. See: ‘EMI prevention/abatement’ on page 2-9 for EMI prevention tips. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 61 Where applicable, do not allow cables to lie across the top of the Card Rack or peripheral cables hang out of the peripheral bays. Loop the excess length for peripheral cables inside the peripheral bays. Attach the monitor cables to the frame. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 62: Probes Environmental Requirements

    Systems and electronic probes are designed for storage temperatures of -5 to +50°C. When exposed to large temperature variations, the product should be kept in room temperature for 10 hours before use. 2-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 63: Facility Needs

    ‘Required facility needs’ on page 2-13 • ‘Desirable features’ on page 2-13 • ‘Recommended and Alternate Ultrasound Room Layout’ on page 2-14 • ‘Networking setup requirements’ on page 2-16 Venue 50 – Basic Service Manual 2-11 5447566-100 English Rev. 7...

  • Page 64: Purchaser Responsibilities

    All electrical work on these products must comply with the requirements of applicable electrical codes. The purchaser of GE equipment must only utilize qualified personnel to perform electrical servicing on the equipment.

  • Page 65: Required Facility Needs

    Storage for linens and equipment • Nearby waiting room, lavatory, and dressing room • Dual level lighting (bright and dim) • Lockable cabinet ordered by GE for its software and proprietary manuals Venue 50 – Basic Service Manual 2-13 5447566-100 English Rev. 7...

  • Page 66: Recommended And Alternate Ultrasound Room Layout

    Figure 2-1. Minimal floor plan, 2.5 m x 3 m (8 by 10 foot) Recommended floor plan suggestion Add graphic here, when available. Figure 2-2. A 14 by 17 foot recommended floor plan 2-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 67 5. Hot and Cold water 2. UPS 6. Dedicated mains power 3. Ethernet network wall outlet outlet Figure 2-3. Suggested Room with EchoPAC PC workstation and Ultrasound Scanner Venue 50 – Basic Service Manual 2-15 5447566-100 English Rev. 7...

  • Page 68: Networking Setup Requirements

    With DICOM, images can be archived, stored, and retrieved faster, easier, and at a lower cost. 2-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 69 Ultrasound system for DICOM APPLICATION INFORMATION. A field for the make (manufacturer) and the revision of the device, is also included. This information may be useful for error solving. Venue 50 – Basic Service Manual 2-17 5447566-100 English Rev. 7...
  • Page 70 Site Preparations DICOM Option Pre-installation requirements (continued) Figure 2-4. Worksheet for DICOM Network Information 2-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 71: Environmental Dangers

    Patient Environment. The patient environment/vicinity will be depicted as a dashed line in this procedure. See example below. 1. Patient environment Figure 2-5. Patient environment Venue 50 – Basic Service Manual 2-19 5447566-100 English Rev. 7...
  • Page 72 Site Preparations 2-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 73: Chapter 3 - System Setup

    How to prepare the facility and unit of the actual installation, and how to check and test the unit, probes, and external peripherals for electrical safety are also included in this procedure. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 74: Overview

    ‘Receiving and unpacking the equipment’ on page 3-6 • ‘Preparing for Setup’ on page 3-22 • ‘Completing the setup’ on page 3-23 • ‘System Configuration’ on page 3-29 • ‘Paperwork after setup’ on page 3-56 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 75: Setup Reminders

    Average setup time • Unpacking the Venue 50: 20 minutes • Set up Venue 50 wo/options: 30 minutes (dependent on the configuration that is required) • DICOM Network Configuration: 30 minutes The Venue 50 installation and functional checkout will take approximately one hour.
  • Page 76 WHEN USING ANY TEST INSTRUMENT THAT IS DANGER CAPABLE OF OPENING THE AC GROUND LINE (I.E., METER’S GROUND SWITCH IS OPEN), DON’T TOUCH THE UNIT! Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 77 Operator Manual(s) CAUTION The User Manual(s) should be fully read and understood before operating the Venue 50 and kept near the Ultrasound system for quick reference. Acoustic Output Hazard CAUTION Although the ultrasound energy transmitted from the Venue 50 probe is within AIUM/NEMA standards, avoid unnecessary exposure.

  • Page 78: Receiving And Unpacking The Equipment

    System Setup Receiving and unpacking the equipment Contents in this section • ‘Receiving the Venue 50’ on page 3-7 • ‘Unpacking the Venue 50’ on page 3-9 • ‘Unpacking Docking Station’ on page 3-13 • ‘Unpacking Docking Cart’ on page 3-16 •...

  • Page 79: Receiving The Venue 50

    Check the shipping container for special instructions. Verify that the container is intact. In some cases a secondary container may be used. If so, ask the carrier for unpacking instructions. Figure 3-1. Labels on Package Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 80: Unpacking The Equipment

    Please carefully unpack the system, and do not dispose the CAUTION package of Venue 50, so that it can be reused for service. Please keep the protective bag of Venue 50 in box, so that it CAUTION can be used for shipping or transportation.
  • Page 81 1. Cut the four PLASTIC BANDs 2. Cut the adhesive tape and open top covers of paper carton. Adhesive tape Plastic Bands Figure 3-2. Open Top Covers of Paper Carton Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 82 Figure 3-3 on page 3-10. 4. Take out the Accessories Package and Console Package. Refer to Figure 3-3 on page 3-10. Figure 3-3. Unpacking the Venue 50 Table 3-1: Unpacking the Venue 50 Item Description Accessories Package Console Package Paper Pad Do not lift the unit by the rubber band.
  • Page 83 Figure 3-4 on page 3-11. Figure 3-4. Taking out the system Table 3-2: Taking out the system Item Description Paper pad Battery Battery bag Foam PE bag Venue 50 Protective bag Venue 50 – Basic Service Manual 3-11 5447566-100 English Rev. 7...
  • Page 84 Aquasonic gel SD Card adapter Power Cable (option) Foam NOTE: Make sure all the items in the checklist are in the Accessories box, contact GE Service if any problem. 3-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 85 1. Cut the four PLASTIC BANDS. 2. Cut the adhesive tape and open the top covers of the paper carton. Figure 3-6. Open the top covers of the paper carton Venue 50 – Basic Service Manual 3-13 5447566-100 English Rev. 7...
  • Page 86 Figure 3-7. Unpacking Docking Station Table 3-4: Docking Station Item Description Probe holder bag Foam Docking Station bag Probe holders Docking Station module Docking Station desk support module Carton Power cord 3-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 87 5. Place the Docking Station Module on track of Base Support Module starting from the left, and slowly move it to the right till it clicks. Figure 3-8. Install Docking Station Venue 50 – Basic Service Manual 3-15 5447566-100 English Rev. 7...
  • Page 88 4. Remove the carton frames on both sides. 5. Remove all the foam and the ESD bag, cut the wire ties on the chassis. Take out the Docking Cart. Figure 3-9. Unpack the Docking Cart 3-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 89 Unpacking 3-probe Port Box 1. Cut the four PLASTIC BANDs. 2. Cut the adhesive tape and open top covers of paper carton. Figure 3-10. Open top covers of paper carton Venue 50 – Basic Service Manual 3-17 5447566-100 English Rev. 7...
  • Page 90 Gel holder Gel holder Printer shelf with drawer assy On shelf basket assy Venue 50 3-probe Port Box user instructions Rating plate label for 3-probe Port Box option Rating plate label for 3-probe Port Box 3-18 Venue 50 – Basic Service Manual...
  • Page 91 Unpacking Power Module Package 1. Cut the four PLASTIC BANDs. 2. Cut the adhesive tape and open top covers of paper carton. Figure 3-12. Open top covers of paper carton Venue 50 – Basic Service Manual 3-19 5447566-100 English Rev. 7...
  • Page 92 Figure 3-13. Unpacking the 3-probe Port Box Table 3-6: Power Module Box Item Description Power Module Tray Assy Power Module User Instruction Warning Label Rating Plate label for Power Module Rating Plate label for carton 3-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 93: Moving Into Position

    Receiving and unpacking the equipment Moving into Position In general, a single adult can move the Venue 50. Before moving, store all loose parts in original accessory box or in back pack. Return probes to original box. Packing the Equipment Please pack Venue 50 in the reverse order of unpacking.

  • Page 94: Preparing For Setup

    System Voltage Settings • Verify that the scanner is set to the correct voltage. The Voltage settings for the Venue 50 Scanner is found on a label located on the AC adapter. • 220-240VAC(China); 100-120VAC(USA/Japan);...

  • Page 95: Completing The Setup

    ‘System specifications’ on page 3-29 • ‘Electrical specifications’ on page 3-30 • ‘Connecting probes’ on page 3-25 • ‘Power On / Boot Up’ on page 3-28 • ‘Power shut down’ on page 3-28 Venue 50 – Basic Service Manual 3-23 5447566-100 English Rev. 7...

  • Page 96: Mounting The System To Docking Station/Cart

    Follow these steps to mount the system to docking station/cart: 1. Place the docking station and system on a stable surface. 2. Carefully pick up the system. Align the port on the Venue 50 with the docking port and carefully push into place.

  • Page 97: Connecting Probes

    Keep the probe cables away from the wheels. CAUTION Do not bend the probe cables. Do not cross cables between probes. Venue 50 – Basic Service Manual 3-25 5447566-100 English Rev. 7...
  • Page 98 5. Plug the probe connector into the probe port on right side of Venue 50 with the label facing the front. Figure 3-16. Connect a probe 6. Carefully position the probe cable so that it is free to move and is not resting on the floor.
  • Page 99 2. Pull the probe and connector straight out of the probe port. Figure 3-18. Disconnect a probe NOTE: Please do not drag the probe cable in order to avoid cable damage. Venue 50 – Basic Service Manual 3-27 5447566-100 English Rev. 7...

  • Page 100: Power On / Boot Up

    Power On / Boot Up For procedure, please refer to ‘Power ON/Boot Up’ on page 4-4. Power shut down For procedure, please refer to ‘Power shut down’ on page 4-7. 3-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 101: System Configuration

    2-11.) • Verify that the specifications below don’t conflict with any on-site conditions. Physical dimensions Table 3-7: Physical Dimensions of Venue 50 Height Width Depth Unit 11.1 10.8 inches Venue 50 – Basic Service Manual 3-29 5447566-100 English Rev. 7...

  • Page 102: Electrical Specifications

    System Setup Electrical specifications Connecting a Venue 50 to the wrong voltage level will most WARNING likely destroy it. Verification of the system’s voltage setting Verify that the mains voltage specified for the Venue 50 is available on-site. The voltage setting for the unit is found on the rating plate of the system.

  • Page 103: Approved Peripherals

    SONY UP-D897,UP-D898 USB Memory Stick SanDisk SanDisk 4G SD Card Reader Transcend TS-RDP5K Wireless Network Card Edimax EW-7711UTn Barcode Reader Honeywell Xenon 1900 Footswitch Steute MKF 21S/1S-MED HID GP26 Venue 50 – Basic Service Manual 3-31 5447566-100 English Rev. 7...

  • Page 104: Connecting Cables

    System Setup Connecting Cables Equipment damage possibility. Be sure to use the following WARNING recommended connecting cables to connect recording devices and a network with Venue 50 console. Table 3-10: List of Connecting Cables Name Part No. Figure NOTE Printer USB Cable...

  • Page 105: Peripheral/Accessories Connector Panel

    System Configuration Peripheral/Accessories Connector Panel Venue 50 peripherals and accessories can be properly connected using the side connector panel. Docking Station/Cart Connector Panel Located on the two sides of Docking Station/Cart are input and output connectors. Figure 3-20. Docking Station/Cart Connector Panel 1.
  • Page 106 TMDS Data2- TMDS Data1+ Reserved (N.C. on device) TMDS Data1 Shield TMDS Data1- TMDS Data0+ DDC/CEC Ground TMDS Data0 Shield +5V Power TMDS Data0- Hot Plug Detect TMDS Clock+ 3-34 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 107 1. Insert SD Card to the system. a. Pull the SD Socket cover towards the back of the Venue 50 to make it easy to open. Figure 3-21. Open SD Card Socket cover b. Insert the SD Card into the SD Card Socket on top of the system with the labeled side facing the front of the Venue 50.
  • Page 108 3. Connect USB Memory stick to the system. USB Memory stick can be properly connected to the USB port on the Docking Station/Cart. Figure 3-24. USB Memory Stick Connection 3-36 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 109 4. Connect external LCD to the HDMI port of the Docking Station/Cart. Figure 3-25. External LCD Connection 5. Connect the Wireless Network Card to the USB port of the Docking Station/Cart. Figure 3-26. Wireless Network Card Connection Venue 50 – Basic Service Manual 3-37 5447566-100 English Rev. 7...
  • Page 110 6. Connect the footswitch to the USB port of the Docking Station/Cart. Figure 3-27. Footswitch Connection 7. Connect the barcode reader to the USB port of the Docking Station/Cart. Figure 3-28. Barcode Reader Connection 3-38 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 111 Be sure to fully inset the grooves into the top side slides. NOTE: The 3-probe Port shall be mounted to the front of the Docking Cart. Figure 3-30. 3-probe Port Position Venue 50 – Basic Service Manual 3-39 5447566-100 English Rev. 7...
  • Page 112 System Setup Connect 3-probe Port to Docking Cart (continued) 2. Connect the 3-probe Port to the Venue 50. Figure 3-31. 3-probe Port Connection 3. Press the cable hook and put the cable into the hook. Figure 3-32. Cable Hook NOTE: Pull the cable hook if it does not pop out completely.
  • Page 113 5. Connect the E8CS-SC probe holder and gel holder to the probe holders. Figure 3-34. Probe Holder Connection 6. Connect the probes to the 3-probe port. Figure 3-35. Probe Connection Venue 50 – Basic Service Manual 3-41 5447566-100 English Rev. 7...
  • Page 114 The printer shelf shall be mounted to the back of the Docking Cart. NOTE: The console in the figures above is only for your reference. Please connect Venue 3-probe port to Venue 50. 3-42 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 115 The probe is connected to the relevant port, but the software option key for this probe has not been activated. Please contact your local GE representative and place an order for the additional software option. See “Add new software option keys” in Basic User Manual for more information Venue 50 –...
  • Page 116 System Setup Connect Power Module to Docking Cart Preparation Shutdown Venue 50 and disconnect the power cord from the docking cart. Overview The whole Power Module kit includes 2 parts: a. Power Module b. Tray Assy It is not permitted to disassemble the Power Module by CAUTION operators.
  • Page 117 3. Push the Tray Assy inward along the edge of the base chasis. Ensure both edges of the Tray Assy are inside of the guide slides of the base chasis. Venue 50 – Basic Service Manual 3-45 5447566-100 English Rev. 7...
  • Page 118 Lock Position b. Unlock Position 5. Disconnect the cable tie, connect the power cord to the Docking Cart, then position the retaining clip over the power cord. 3-46 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 119 NOTE: After installed successfully, the lock button should be at the lock position. If the lock button moves to the unlock position while the Venue 50 is in use, the Power Module needs to be re-mounted Table 3-13: Label/Icon Explanations...
  • Page 120 System Setup Disconnect Power Module from Docking Cart Preparation Shutdown Venue 50 and Power Module, disconnect the power cord from Power Module. Dismounting Procedure 1. Slide the lock button to the unlock position. 2. Lift up the Power Module vertically.
  • Page 121 3. Position the retaining clip up the power cord and disconnect the power cord. 4. Slide both hooks to unlock position. 5. Lift up the Tray Assy from the base chassis of Docking Cart vertically. Venue 50 – Basic Service Manual 3-49 5447566-100 English Rev. 7...
  • Page 122 NOTE: Press Power On /Off switch to turn it on even when an active AC outlet is connected. Otherwise the docking cart, console and peripherals can not get electricity. 3-50 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 123 When LED3 is flashing, connect the Power Module with a CAUTION live AC outlet and record the data at once. Otherwise the data will be missing when the system powers off suddenly Venue 50 – Basic Service Manual 3-51 5447566-100 English Rev. 7...
  • Page 124 Manufacturer SONY Working Power Load (W) NOTE: Do not remove the console battery from Venue 50 system. If the power, with the operating voltage 110v or below, goes off, the Power Module may fail to function. NOTE: Please avoid dropping the Power Module.
  • Page 125 Alternating Current (AC) is off. 2. If the lock button moves to the unlock position while the Venue 50 is in use, the Power Module needs to be re-mounted. For the explanation of other labels/Icons on Rating Plate/Label, please refer to the latest revision of Venue 50 Basic User Manual.

  • Page 126: Available Probes

    System Setup Available probes For different software versions, please see in specification in the Venue 50 Basic User Manual for probes and intended uses. Table 3-17: List of Probes for Venue 50 Material of Catalog Probe Name Headshell TYPE Number...

  • Page 127: Software Options Configuration

    Venue 50 Basic User Manual, Chapter 4, Customizing Your System. Software version check-out 1. Power on Venue 50 scanner and wait until system booting to main screen. 2. Press Utility, then select About. 3. Check whether the software version is the right one for use.

  • Page 128: Paperwork After Setup

    Specific language versions of the User Manual may also be available. Check with your GE Sales Representative for availability. For a complete list of User’s Manuals for Venue 50, refer to Chapter 9 in this manual. Product Locator Installation Card...

  • Page 129: Chapter 4 - General Procedures And Functional Checks

    Chapter 4 General Procedures and Functional Checks This chapter provides procedures for quickly checking major functions of the Venue 50 and diagnostics instructions using the built-in service software and power supply adjustments. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 130: Overview

    ‘Functional checks’ on page 4-8 Equipment required To perform these tests, you'll need any of the sector, linear, or convex transducers. (Normally you should check all the transducers used on the system). Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 131: General Procedures

    General procedures General procedures Energy Control and Power Lockout for Venue 50. WARNING When servicing parts of the Ultrasound system where there is exposure to voltage greater than 30 volts: 1. Follow LOCK OUT/TAG OUT procedures. 2. Turn off the breaker.

  • Page 132: Power On/Boot Up

    The covers are required for safe operation, good Ultrasound system performance and cooling purposes. Use only power supply cords, cables and plugs provided by or CAUTION designated by GE. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 133 General procedures Connect AC/DC to the Docking Station/Cart Mount the Venue 50 to the docking station/cart. Connecting AC/ DC to the docking station/cart, involves preliminary checks of the power cord, voltage level and compliance with electrical safety requirements. 1. Ensure that the wall outlet is of appropriate type.
  • Page 134 General Procedures and Functional Checks Power on Press Power On/Off key once, the system starts. Figure 4-2. Power on the Venue 50 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 135: Power Shut Down

    DO NOT unplug and/or transport the unit until after the power CAUTION off sequence has been completed. Failure to do so may result in corrupted patient files. Adjusting the Display Monitor See ‘Adjust Brightness’ on page 6-3 for more information. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 136: Functional Checks

    General Procedures and Functional Checks Functional checks Overview In this section, the functional checks for Venue 50 are described. Functional checks are used to verify that the product works as intended. Functional checks may also be used during troubleshooting. Venue 50 – Basic Service Manual...

  • Page 137: Touch Panel

    Functional checks Touch Panel The touch panel contains exam function and mode/function specific controls. Figure 4-3. Venue 50 Menu Bar Home: Enter home page Split: Split the screen into two Scan, Review: Perform various functions 10. Zoom: Magnify a region of interest : eSmart Trainer (option) 11.

  • Page 138: Monitor Display

    10. Center line mark 16. Measurement result window Battery status 11. Measurement caliper 17. Cine Gauge Wireless and local network 12. Comment 18. Function controls connection status Probe and application 4-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 139: Performance Tests

    2. Turn ON the scanner (if it isn’t turned on already). B Mode Checks Introduction B Mode is intended to provide two dimensional images and measurement capabilities concerning the anatomical structure of soft tissue. Figure 4-5. B Mode Screen Venue 50 – Basic Service Manual 4-11 5447566-100 English Rev. 7...
  • Page 140 Press to activate the Needle mode. Gain, Angle and Tilt can be activated. The needle function only applies to linear probes. Note: Before activating the Needle mode, please make sure to select Interventional preset first. 4-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 141 • Edge Enhance: Make the image edge clearer/sharper. • FOV: Adjust field of view • AO: Adjust acoustic output Note: The configurable parameters can be configured in Utility->Settings->ScanConfig. Venue 50 – Basic Service Manual 4-13 5447566-100 English Rev. 7...
  • Page 142 Color Flow Mode is a Doppler Mode intended to add color-coded qualitative information concerning the relative velocity and direction of fluid motion within the B-Mode image. Figure 4-7. Color Flow Mode Screen 4-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 143 • Color Map: Show the direction of the flow and highlight the higher velocity flows. • Invert: Allow to view blood flow according to personal preference, without flipping the probe. Table 4-1 for more information. Venue 50 – Basic Service Manual 4-15 5447566-100 English Rev. 7...
  • Page 144 Power Doppler Imaging (PDI) is a color flow mapping technique used to map the strength of the Doppler signal coming from the flow rather than the frequency shift of the signal. Figure 4-9. Power Doppler Imaging Mode Screen 4-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 145 PDI Mode Controls Controls Affect on Image Configurable • PDI Map: Show the power of the flow and highlight the stronger power flows. Parameters Table 4-1 Table 4-2 for more information. Venue 50 – Basic Service Manual 4-17 5447566-100 English Rev. 7...
  • Page 146 M Mode is intended to provide a display format and measurement capability that represents tissue displacement (motion) occurring over time along a single vector. Figure 4-11. M Mode Screen 4-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 147 Affect on Image Configurable • Sweep Speed: Change the speed of the timeline. Parameters • Layout: Change the Horizontal/Vertical layout between B Mode and M Mode. Table 4-1 for more information. Venue 50 – Basic Service Manual 4-19 5447566-100 English Rev. 7...
  • Page 148 3. Touch the screen and two active calipers display. 4. Move the calipers to the desired position. 5. Press Set, then the value is displayed in the results window. 4-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 149 If you have purchased the cart option, be sure to keep probe cables free from the wheels. Be careful not to trip on the probe cables if using the WARNING device without the optional cart. Venue 50 – Basic Service Manual 4-21 5447566-100 English Rev. 7...
  • Page 150 Play/Pause. To stop CINE Loop playback. press Play/ Pause. Moving through a CINE Loop Frame By Frame Press < or > to move through CINE memory one frame at a time. 4-22 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 151 Functional checks Image Management For Image Management functionality refer to the Venue 50 User Manual. It talks about several topics: • Zooming an Image • Split Screen • Using Cine • Review Archived Information • Image Storage • eSmart Trainer (Option) Venue 50 –...

  • Page 152: Software Configuration Checks

    Location Name is correct is correct Check Language settings Desired Language is displayed Check that all of the customer’s All authorized functions are enabled options are set up correct 4-24 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 153: Peripheral Checks

    This section describes the final setup for the Peripherals and the Operational Check-out. For Peripherals installtion information, See ‘Peripherals Connection’ on page 3-35 for more information. Check that peripherals work as described below: Venue 50 – Basic Service Manual 4-25 5447566-100 English Rev. 7...
  • Page 154 The Printer icon will be shown on the configure Printer as D1 or D2. Dataflow Button. Press Dataflow Button with Printer Icon to The images are printed. print the images. 4-26 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 155 Connect Barcode Scanner to the USB port. Activate Barcode Reader in Utility->Settings->USB Accessories. Scan barcode. A beep should be heard and the patient information will be shown on the Home screen. Venue 50 – Basic Service Manual 4-27 5447566-100 English Rev. 7...
  • Page 156 General Procedures and Functional Checks 4-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 157: Chapter 5 - Components And Functions (Theory)

    Chapter 5 Components and Functions (Theory) This chapter explains Venue 50’s system concepts, component arrangement, and subsystem functions. It also describes the power distribution system and probes. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 158: Overview

    Components and Functions (Theory) Overview Contents in this chapter • ‘Overview’ on page 5-2 • ‘Block Diagram and Theory’ on page 5-3 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 159: Block Diagram And Theory

    Block Diagram and Theory Block Diagram and Theory Block Diagram of Venue 50 and Docking Station/Cart Figure 5-1. Venue 50 and Docking Station System Block Diagram Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 160 Components and Functions (Theory) Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 161: Chapter 6 - Service Adjustments

    Chapter 6 Service Adjustments This chapter describes how to test and make adjustments to the Venue 50. You can use these to test the system for errors. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 162: Overview

    Service Adjustments Overview Contents in this chapter • ‘Overview’ on page 6-2 • ‘Monitor Adjustments’ on page 6-3 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 163: Monitor Adjustments

    1. Press Utility->Settings->Common, then choose the desired brightness in the Brightness select box. Adjust Volume To adjust the volume: 1. Press Utility->Settings->Miscellaneous, then choose the desired volume in the Volume select box. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 164: Adjust Monitor On Docking Station/Cart

    Adjust Monitor on Docking Station/Cart To adjust the monitor on Docking Station/Cart: 1. Tilt the LCD monitor for the optimum viewing angle. The maximum angle is 45 degrees. Figure 6-1. Tilt the LCD monitor Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 165 To adjust the height of Docking Cart: 1. Hold the cart handle by both hands, step on the pedal, push down or lift to adjust the height. Figure 6-2. Cart height adjustment Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 166 Damage to the probe cable may result if the brake pedal CAUTION catches the cable and pulls it tight against the base leg. This puts stress on the probe and connector while in the holder. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 167: Chapter 7 - Troubleshooting

    Very basic host, system and board levels are run whenever power is applied. Some Service Tools may be run at the application level. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 168: Overview

    Troubleshooting Overview Contents in this chapter • ‘Overview’ on page 7-2 • ‘Troubleshooting’ on page 7-3 • ‘Remote Service’ on page 7-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 169: Troubleshooting

    Troubleshooting Troubleshooting Console Troubleshooting Trees System Doesn’t Boot This is an overall diagram showing a recommended sequence for troubleshooting a no-boot situation Figure 7-1. System Doesn’t Boot Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 170 Troubleshooting System Doesn’t Boot (continued) Figure 7-2. System Doesn’t Boot (Cont’d) Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 171 Troubleshooting System Doesn’t Boot (continued) Figure 7-3. System Doesn’t Boot (Cont’d) Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 172 Troubleshooting Structured Artifact in the image Figure 7-4. Structured Artifact in the image Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 173 Troubleshooting Structured Artifact in the image (continued) Figure 7-5. Structured Artifact in the image (Cont’d) Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 174 Troubleshooting Structured Artifact in the image (continued) Figure 7-6. Structured Artifact in the image (Cont’d) Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 175 Troubleshooting B Mode Low Sensitivity Figure 7-7. B Mode Low Sensitivity Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 176 Troubleshooting B Mode Low Image Quality Figure 7-8. B Mode Low Image Quality 7-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 177 Troubleshooting Noise in B Mode Figure 7-9. Noise in B Mode Venue 50 – Basic Service Manual 7-11 5447566-100 English Rev. 7...
  • Page 178 Troubleshooting Color Flow Low Sensitivity Figure 7-10. Color Flow Low Sensitivity 7-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 179 Troubleshooting Nosie in Color Flow Figure 7-11. Noise in Color Flow Venue 50 – Basic Service Manual 7-13 5447566-100 English Rev. 7...
  • Page 180 Troubleshooting Touch panel - Impaired Sensitivity Figure 7-12. Unable to Scan 7-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 181 Troubleshooting LCD Display - Impaired Function Figure 7-13. LCD Display Venue 50 – Basic Service Manual 7-15 5447566-100 English Rev. 7...

  • Page 182: Peripheral Troubleshooting Trees

    Troubleshooting Peripheral Troubleshooting Trees Unable Recording by Printer Figure 7-14. Unable Recording by Printer 7-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 183 Troubleshooting SD Card Figure 7-15. Unable to save data to SD Card Venue 50 – Basic Service Manual 7-17 5447566-100 English Rev. 7...
  • Page 184 Troubleshooting USB Memory Stick Figure 7-16. Unable to save data to USB Memory Stick 7-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 185: Battery Troubleshooting

    Troubleshooting Battery Troubleshooting System can’t work with battery only. Table 7-1: Battery Troubleshooting Reason Battery Broken. Battery is not connected well. Charger block issue, change charge board. Venue 50 – Basic Service Manual 7-19 5447566-100 English Rev. 7...

  • Page 186: Remote Service

    Ports At least on USB port or SD Card Reader available pointing device Mouse with left and right buttons Alphanumeric Keyboard required Network Wired or Wireless network connection required 7-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 187 1. Insert the software upgrade SDHC card to the computer and double click the corresponding drive. 2. Double click Setup.exe. The screen is displayed as below. Press Next. Figure 7-17. Installation Setup Venue 50 – Basic Service Manual 7-21 5447566-100 English Rev. 7...
  • Page 188 Table 7-2, the screen is displayed as below. Press Install All. After all requirements are installed, press Next. Figure 7-18. Install All 4. When the screen is displayed as below, press Install. Figure 7-19. Install the software 7-22 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 189 5. When the installation procedure begins, the screen is displayed as below. Figure 7-20. Installation Procedure 6. When the installation procedure completes, the screen is displayed as below. Press Next. Figure 7-21. Installation Completed Venue 50 – Basic Service Manual 7-23 5447566-100 English Rev. 7...
  • Page 190 Troubleshooting Installation Procedure (continued) 7. When the screen is displayed as below, press Finish to reboot the computer. Figure 7-22. Reboot the computer 7-24 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 191: Gateway Running

    2. Input the Serial Number of Venue device into the field. Then press Next. Figure 7-23. Input Venue SN 3. Press Configure to open the Insite Service Platform. Figure 7-24. Press Configure Venue 50 – Basic Service Manual 7-25 5447566-100 English Rev. 7...
  • Page 192 Device Name and CRM No. are automatically filled in. Do not need to modify the information. NOTE: The operator does not need to modify the fields in Advanced Configuration. Figure 7-25. Insite Service Platform Configuration 7-26 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 193 Preparations (continued) 5. When the configuration is saved. Press OK. Then close the configuration screen. Figure 7-26. Configuration Saved 6. Press Next to run the Gateway. Figure 7-27. Run Gateway Venue 50 – Basic Service Manual 7-27 5447566-100 English Rev. 7...
  • Page 194 1. Run Gateway by double clicking Gateway in the customer Figure 7-28. Run Gateway 2. Select Start Remote Desktop Service at the lower right corner. Figure 7-29. Start Remote Desktop Service 7-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 195: Remote Software Download/Reload

    You may review and check if the customer PC is the right one by click Device Profile Dialog Icon. Figure 7-30. Search Customer PC Figure 7-31. View Device Profile Venue 50 – Basic Service Manual 7-29 5447566-100 English Rev. 7...
  • Page 196 NOTE: The download process will take some time. Please press View Transfer Log to check if the software has been downloaded successfully. Figure 7-33. Download the software package 7-30 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 197 Remote Service Remote Software Download/Reload (continued) 5. Select Connect to device. Click Connect, OK, OK, then the customer PC screen will show. Figure 7-34. Connect to Customer device Venue 50 – Basic Service Manual 7-31 5447566-100 English Rev. 7...
  • Page 198 Troubleshooting Remote Software Download/Reload (continued) 6. Go to Homepage->Venue Gateway Software->Connect Venue 50, then input the Console IP Address and click Ok. Figure 7-35. Input Scanner IP 7. When the figure below appears, press OK. Figure 7-36. Connect to Scanner 7-32 Venue 50 –...
  • Page 199 Press OK as soon as possible once the box appears. 9. When the figure below appears, press OK. Then the customer PC is connected to the console. Figure 7-38. PC Connected Venue 50 – Basic Service Manual 7-33 5447566-100 English Rev. 7...
  • Page 200 Reinstall. When a dialogue box appears, press OK. . Figure 7-39. Software Installed 11. When the figure below appears on the scanner, press OK to receive package. The installation process begins. Figure 7-40. Installation Process 7-34 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 201 13. After the installation process is finished, a dialogue box will appear on the scanner. Press OK to shut down the system. Reboot to upgrade the system. Figure 7-42. System Shutdown Venue 50 – Basic Service Manual 7-35 5447566-100 English Rev. 7...

  • Page 202: Remote Diagnostics

    3. Select Connect to device. Click Connect, OK, OK, then the customer PC screen will show. 4. Go to Homepage->Venue Gateway Software->Connect Venue 50, then input the Console IP Address and click Ok. The customer press OK on the console. Then the customer PC is connected to the console.

  • Page 203: Remote Log

    1. Access to https://insite2.health.ge.com/qss/gelogin.jsp. 2. Go to Transfer Files -> Device -> Devlog -> the customer console name, select log file and press OK. Figure 7-44. Log Screen Venue 50 – Basic Service Manual 7-37 5447566-100 English Rev. 7...
  • Page 204 Troubleshooting 7-38 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 205: Chapter 8 - Replacement Procedures

    Chapter 8 Replacement Procedures This chapter describes how to remove and install, or replace, modules and subsystems in the Venue 50. It also includes instructions for installing and re-installing the software. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 206: Overview

    ‘Warnings and important information’ on page 8-3 • ‘Disassembly/Re-assembly’ on page 8-6 • ‘Loading Base Image Software’ on page 8-13 • ‘Used Media and Used Parts Disposal’ on page 8-23 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 207: Warnings And Important Information

    Because of the limited access to cabinets and equipment in the WARNING field, placing people in awkward positions, GE has limited the lifting weight for one person in the field to 16 KG (35 LBS). Anything over 16 KG (35 LBS) requires 2 people.
  • Page 208 The waste of electrical and electronic equipment must not be WARNING disposed as unsorted municipal waste and must be collected separately. Please contact the manufacturer or other authorized disposal company to decommission your equipment. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 209: Returning/Shipping Probes And Repair Parts

    If the Venue 50 needs to be sent for repair, ensure that any patient information is erased from the storage device, or that the storage device is removed from the Venue 50 before shipping.

  • Page 210: Disassembly/Re-Assembly

    HAZARDOUS VOLTAGES AND HIGH CURRENT LEVELS TO AVOID ACCIDENTAL CONTACT Do not wear the ESD wrist strap when you work on live circuits CAUTION and more than 30V peak is present. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 211: Tools Needed For Servicing Venue 50

    Disassembly/Re-assembly Tools needed for servicing Venue 50 Table 8-1: Standard tools list for Venue 50 Screwdriver Part Name Part No. Screw Description Description Screw 5138465 Screw FH M2.5X5 (NL) Phillips #1 Screw 5162727 Screw M3x25 (NL) TORX #10 Screw 5308509...

  • Page 212: Docking Station Desk Support Assy

    Push the trigger to the other side, then use the other hand to take the Docking module off track. Mounting Procedure 1. Install the new parts in the reversed order of removal. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 213: Docking Cart Plastic Shelf

    Removal Procedure for Docking Cart Plastic Shelf Steps Corresponding Graphic Lift the Plastic Shelf and remove it from Docking Cart. Mounting Procedure 1. Install the new parts in the reversed order of removal. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 214: Docking Cart Printer Shelf

    Common phillips screwdrivers Needed Manpower • 1 person, 2 minutes Preparation • Cut off the AC Power input. • Lift the cart to the highest position. • Lock the wheels. 8-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 215 Removal Procedure for Docking Cart Printer Shelf Steps Corresponding Graphic Disconnect the printer power cable and USB Cable from Docking module. Lift the Printer Shelf and remove it from Docking Cart. Venue 50 – Basic Service Manual 8-11 5447566-100 English Rev. 7...
  • Page 216 Corresponding Graphic Reverse the printer shelf with printer, unscrew 4 screws [M3*8], take out the printer. Mounting Procedure 1. Install the new parts in the reversed order of removal. 8-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 217: Loading Base Image Software

    Database, as needed after a hard disk replacement, or if all the content on the hard disk has been erased, the images must be moved away from Venue 50 before doing backup of the Patient Database. Depending on the location set-up, either move the images to a remote server or to removable media like SD Card or USB Memory Stick.

  • Page 218: Recording Important Settings And Parameters

    CAUTION It is considered to be best practice to always keep a record on paper of the settings for the Venue 50. Verify if it is current before you start to load software! You may go to Utility to record the settings and parameters for General, Settings, Image, Measure, System, Connectivity and About.

  • Page 219: Loading The System Software

    2. Power on the system, then the software upgrading startup screen displays. Time in the upper right corner shows system time, and the time in the lower right corner shows the time of upgrading process. Venue 50 – Basic Service Manual 8-15 5447566-100 English Rev. 7...
  • Page 220 All the user data and log will be cleared. Full installation will clear all the user data and log. WARNING 4. Press Confirm to confirm the selection. Press Exit to cancel. Figure 8-1. Select Installation Type 8-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 221 Loading the System Software (continued) 5. Press Start to begin the upgrading process. Figure 8-2. Start Installation Process NOTE: Before the process is started, the system will count down 10 seconds. Venue 50 – Basic Service Manual 8-17 5447566-100 English Rev. 7...
  • Page 222 7. When the process is paused, press Continue to go back to the upgrading, press Exit to cancel the upgrading. Figure 8-3. Upgrading process paused 8-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 223 Press and hold down the On/Off switch until the system shutdown. Figure 8-4. Upgrading process complete 9. Perform Touch Screen Calibration: go to Utility->Diagnostics->Miscellaneous to execute touch screen calibration. Venue 50 – Basic Service Manual 8-19 5447566-100 English Rev. 7...
  • Page 224 Replacement Procedures Software Version check out Functional Check-out 1. Press Utility, select About to check whether the software version is the right version for use. Figure 8-5. Software version check 8-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 225 The status “disabled” means the option keys are not activated and not working. Check if the option is installed and if the serial number and option key are correct. Figure 8-6. Strings check Venue 50 – Basic Service Manual 8-21 5447566-100 English Rev. 7...
  • Page 226 Figure 8-7. Probe identification Peripheral Device Check Check to ensure that all the peripheral devices work properly. For instruction of peripheral device check, See ‘Peripheral Checks’ on page 4-25 for more information. 8-22 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 227: Used Media And Used Parts Disposal

    Never keep old software or leave old software at the customer site. 2. Ensure that no Proprietary Material, such as this installation manual and the Venue 50 Proprietary Manual, are left at the customer. Venue 50 – Basic Service Manual 8-23 5447566-100 English Rev.
  • Page 228 Replacement Procedures 8-24 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 229: Chapter 9 - Renewal Parts

    Chapter 9 Renewal Parts This chapter lists the renewal parts available for the Venue 50. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 230: Overview

    Renewal Parts Overview Contents in this chapter • ‘Overview’ on page 9-2 • ‘List of Abbreviations’ on page 9-3 • ‘Renewal Parts Lists’ on page 9-4 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 231: List Of Abbreviations

    Table 9-1: List of Abbreviations ABBREVIATION DESCRIPTION Assy ASSEMBLY FRU Y Replacement Part FRU N Non Stock Part Printed Wire Assembly Hard Disk Drive Liquid Crystal Display Ctrl Control Master Board Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 232: Renewal Parts Lists

    Arabic numerals. For example, item 300B is to replace item 300A, and item 300A is to replace item 300. So please refer to the item numbers for the latest version of the parts. Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 233: Power Cables

    5400868-2 ACDC Power Cable for Brazilian Table 9-3: Accessory parts for Docking Cart Power cable Part Name Part Number Description Qantity Retaining clip KT0006 5317638 Retaining clip for AC inlet Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 234 ACDC Power Cable for Argentina ACDC Power Cable 5125227 ACDC Power Cable for Israel ACDC Power Cable 5125228 ACDC Power Cable for Switzerland ACDC Power Cable 5400793 ACDC Power Cable for Brazilian Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 235: Top Assy

    Renewal Parts Lists Top Assy Table 9-5: Top Assy Item Part Number Part Name Corresponding graphic 5437203-S Top Assy 5262177-4S LCD and touch screen cable kits Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 236: Middle Cover Assy

    Renewal Parts Middle Cover Assy Table 9-6: Middle Cover Assy Part Item Number Part Name Corresponding graphic 5441974-S Middle Cover Assy Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 237: Bottom Assy

    Renewal Parts Lists Bottom Assy Table 9-7: Bottom Assy Item Part Number Part Name Corresponding graphic R2354258-12 TR32 Board 5439562-S Fans 5445872-S SD/USB board 5436553-2S MST board 5487314-S Bottom Cover Assy Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 238 Renewal Parts Table 9-7: Bottom Assy Item Part Number Part Name Corresponding graphic 5195559-2 Battery 5317644-2 Heat Sink 5322731 CMOS Battery Assy 5406280 TR32 V 12 with Heatpipe assy 9-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 239: Docking Station Assy

    Docking Station Assy Item Part Number Part Name Corresponding graphic 5457181-S Docking Holder Assy 5316476 Docking Hinge Assy 5446802-2S Docking Cable 5316922-2 Docking Probe Holder 5316130 Docking Desk Support Venue 50 – Basic Service Manual 9-11 5447566-100 English Rev. 7...
  • Page 240 Renewal Parts Table 9-8: Docking Station Assy Item Part Number Part Name Corresponding graphic 5438745-2S Docking Function Board 5323387-3S Docking Rotating module 5339194 Docking ACDC Module 5341629 Docking Fan 9-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 241: Docking Cart Assy

    Cart Handle Assy 5321852 2 front wheels and 2 back wheels 5321889 Front Cover 5321891-3 Back Cover 5321893-2 Upside Covers 5321895 Below front and back covers 5321896 Below side covers Venue 50 – Basic Service Manual 9-13 5447566-100 English Rev. 7...
  • Page 242 Corresponding graphic 5321897 Below chasis covers 5321899 Pedal cover 5321900 Pedal Assy 5321901 Plastic shelf 5321853-3 Printer shelf 5374990 Deep basket 5491956 Printer shelf with drawer and on shelf basket 9-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 243 Corresponding graphic 5317236 Spring Cable 5323553 Fuse 5317527 Printer USB cable 5323734 Printer power cord 5342989 Power Cable Hook 5363498 Probe Cable Hook kit 5357568 Docking AC Inlet Cable Venue 50 – Basic Service Manual 9-15 5447566-100 English Rev. 7...
  • Page 244 Part Name Corresponding graphic 5447044 Cart AC Inlet Cable 5371446 Gas spring 5440423-S 3-probe Port Box with package SVC 5491955 Multi-probe holder, gel holder and E8CS holder 5459877 Power Module 9-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 245: Accessories And Kits

    Accessories and Kits Table 9-10: Accessories and Kits Item Part Number Part Name 5443754-4 Venue 50 R4.0.3 software upgrade SD Card 600A 5443754-5 Venue 50 R4.0.4 software upgrade SD Card 600B 5443754-6 Venue 50 R4.0.5 software upgrade SD Card 600C 5443754-7 Venue 50 R4.0.6 software upgrade SD Card...

  • Page 246: Probe

    Convex Probe to replace (Frequency Range: 3.1 ± 10%) 5337604 5499966 E8CS-SC ConvexProbe to replace (Frequency Range: 6.5 ± 20%) 5413888 5456227 10C-SC ConvexProbe (Frequency Range: 8.0 ± 20%) 9-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 247: Manuals

    Venue 50 Basic User Manual, German 5446729-111 Venue 50 Basic User Manual, Italian 5446729-121 Venue 50 Basic User Manual, Dutch 5446729-127 Venue 50 Basic User Manual, Brazilian Portuguese 5446729-129 Venue 50 Basic User Manual, Estonian 5446729-140 Venue 50 Basic User Manual, Japanese 5446729-141...
  • Page 248 Item Part Number Description 5446729-176 Venue 50 Basic User Manual, Serbian 5446729-177 Venue 50 Basic User Manual, European Portuguese 5446729-180 Venue 50 Basic User Manual, Ukrainian 5446729-181 Venue 50 Basic User Manual, Indonesian 9-20 Venue 50 – Basic Service Manual...

  • Page 249: Chapter 10 - Care And Maintenance

    Ultrasound system and peripherals. These procedures are intended to maintain the quality of the Ultrasound system’s performance. Read this chapter completely and familiarize yourself with the procedures before performing a task. Venue 50 – Basic Service Manual 10-1 5447566-100 English Rev. 7...

  • Page 250: Overview

    Care and Maintenance Overview Periodic maintenance inspections It has been determined by engineering that your Venue 50 does not have any high wear components that fail with use, therefore no Periodic Maintenance inspections are mandatory. However, some customers’ Quality Assurance Programs may require additional tasks and or inspections at a different frequency than listed in this manual.

  • Page 251: Warnings

    Do not pull out or insert circuit boards while power is on. CAUTION Do not operate this Ultrasound system unless all board covers CAUTION and frame panels are securely in place. System performance and cooling require this. Venue 50 – Basic Service Manual 10-3 5447566-100 English Rev. 7...

  • Page 252: Why Do Maintenance

    Testing results, corrective action and the effects of corrective action must be documented and maintained on the site. Your GE service representative can help you with establishing, performing and maintaining records for a quality assurance program. Contact GE for coverage and/or price for service.

  • Page 253: Maintenance Task Schedule

    The service procedures and recommended intervals shown in the Care and Maintenance Task Schedule assumes that you use your Venue 50 for an average patient load (10-12 per day) and not use it as a primary mobile Ultrasound system which is transported between diagnostic facilities.
  • Page 254 See Notes also after corrective maintenance NOTE: The maintenance may require specialized equipment to complete. NOTE: The periodic maintenances are not mandatory. The table above is for reference only. 10-6 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 255: Tools Required

    Tools required Tools required NOTE: For a list of required tools for servicing the Venue 50, refer to chapter 8. Standard GE tool kit The following is a description of the “Standard” GE tool kit in the USA. Not all tools are required.
  • Page 256 Care and Maintenance Table 10-2: Overview of GE-1 tool kit contents (Continued) Tool ID Description Tool ID Description 9-GH807 Ratchet, Offset, Slotted 9-HT62002 Solder Aid, Fork and Hook 68-412 Ratchet, Offset, Phillips 9-4099 Mirror, Round, Telescoping 9-GH130 Tapered Reamer 9-GH3001...

  • Page 257: Ge-2 Tool Kit

    Tools required Table 10-2: Overview of GE-1 tool kit contents (Continued) Tool ID Description Tool ID Description 9-4516 Pliers 4 1/4 inch Diagonal GE-2 tool kit Table 10-3: Overview of GE-2 tool kit contents GE-2 Sears Kit (#99034) Tool ID...

  • Page 258: Special Tools, Supplies And Equipment Used For Maintenance

    AAMI/ESI 1993 or IEC 60601 or AS/NZS 3551. B/W Printer Cleaning Sheet See printer user manual for requirements Color Printer Cleaning Sheet See printer user manual for requirements Disposable Gloves 10-10 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 259: System Maintenance

    • Where applicable, confirm that the battery is charged. If no AC Input present, use the internal battery. Probes Verify that the Ultrasound system properly recognizes all probes. Displays Verify proper display on the monitor. Venue 50 – Basic Service Manual 10-11 5447566-100 English Rev. 7...

  • Page 260: Functional Checks

    Verify the distance by graduated rule. Distance Accuracy should be within 5%. (Name result from result window Result A, result from graduated rule Result B; Distance Accuracy = (Result B-Result A)/Result A) 10-12 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 261 6 of User Manual. Gently wipe the LCD face. DO NOT use a glass cleaner that has a hydrocarbon base (such as Benzene, Methy Alcohol or Methy Ethyl Ketone) on LCD with the filter (anti-glare shield). Venue 50 – Basic Service Manual 10-13 5447566-100 English Rev. 7...

  • Page 262: Physical Inspection

    View the Log 1. Review the system error log for any problems. 2. Check the temperature log to see if there are any trends that could cause problems in the future. 10-14 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 263: Probe Maintenance

    Ensure that you are completely familiar with the proper care of GE probes. Ultrasound probes can be easily damaged by improper handling. See the User Manual and probe care cards for more details.
  • Page 264 User Manual. Doing so could result in irreparable damage to the probe. Follow care instructions that came with the probe. Disinfect a defective probe before you return it. Be sure to tag CAUTION the probe as being disinfected. 10-16 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 265: Battery Performance Maintenance

    Battery is Ok Replace battery Figure 10-1. Flow chart of Battery Performance Maintenance NOTE: Disconnect all probes when discharge battery. NOTE: Discharge the battery to let the system automatically shut down. Venue 50 – Basic Service Manual 10-17 5447566-100 English Rev. 7...

  • Page 266: Electrical Safety Tests

    (UPS) may not be medical devices! If the UPS is no medical device, it has to be located outside of the patient environment (according to IEC 60601-1 / UL 60601-1). 1. Patient environment 10-18 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 267 ‘Outlet test - wiring arrangement’ on page 10-24 • ‘Grounding continuity’ on page 10-25 • ‘Chassis leakage current test’ on page 10-26 • ‘Probe leakage current test’ on page 10-29 Venue 50 – Basic Service Manual 10-19 5447566-100 English Rev. 7...

  • Page 268: Safety Test Overview

    Possible risk of infection. Do not handle soiled or contaminated CAUTION probes and other components that have been in patient contact. Follow appropriate cleaning and disinfecting procedures before handling the equipment. 10-20 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 269 Check probe leakage current: • Based on your facilities QA program for surface probes. • Based on your facilities QA program for endocavitary probes. • whenever probe damage is suspected. Venue 50 – Basic Service Manual 10-21 5447566-100 English Rev. 7...

  • Page 270: Leakage Current Limits

    Care and Maintenance Leakage current limits Energy Control and Power Lockout for Venue 50. WARNING When servicing parts of the Ultrasound system where there is exposure to voltage greater than 30 volts: 1. Follow LOCK OUT/TAG OUT procedures. 2. Turn off the breaker.
  • Page 271 'heart in box' CF symbol. Sink The current resulting from the application of mains Leakage voltage to the applied part. This test is required test for Type CF applied parts. Venue 50 – Basic Service Manual 10-23 5447566-100 English Rev. 7...

  • Page 272: Outlet Test - Wiring Arrangement

    (grounded supply) conductor and the Grounding (protective earth) conductor are reversed. If later tests indicate high leakage currents, this should be suspected as a possible cause and the outlet wiring should be visually inspected. 10-24 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 273: Grounding Continuity

    0.1 ohms. Reference the procedure in the IEC60601-1. 1. GROUND PIN 2. OHMMETER 3. DOCKING CART 4. ACCESSIBLE METAL PART: • I/O Board • Probe cable hook Figure 10-3. Ground continuity test Venue 50 – Basic Service Manual 10-25 5447566-100 English Rev. 7...

  • Page 274: Chassis Leakage Current Test

    Neutral when the unit is powered ON. Be sure to turn the unit power OFF before switching them using the POLARITY switch and/or the NEUTRAL switch. Otherwise, the unit may be damaged. 10-26 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 275 The maximum allowable limit for chassis source leakage is shown in Table 10-11 on page 10-22. Venue 50 – Basic Service Manual 10-27 5447566-100 English Rev. 7...
  • Page 276 Optional Optional Power Switch Switch Cover Parts Test 3 Test 4 Enter Name of tested peripheral here: NORM OPEN NORM CLOSED OPEN CLOSED NORM OPEN NORM CLOSED OPEN CLOSED 10-28 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 277: Probe Leakage Current Test

    It is abnormal if no leakage current is measured. If no leakage current is detected, check the configuration of the test equipment. Tools For needed tools, see: ‘Tools required’ on page 10-7. Venue 50 – Basic Service Manual 10-29 5447566-100 English Rev. 7...
  • Page 278 Follow the Safety Analyzer tool instruction to test each transducer for leakage current. The electrical Safety Analyzer tool should be calibrated and compliant with AAMI/ESI 1993 or IEC 60601 or AS/NZS 3551. 10-30 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 279 Typical Data Sheet For Transducer Source Leakage Current Transducer Tested: Tester Power Polarity Tester GROUND or Unit Power Switch NUETRAL Switch Measurement NORM OPEN NORM CLOSED OPEN CLOSED NORM OPEN NORM CLOSED OPEN CLOSED Venue 50 – Basic Service Manual 10-31 5447566-100 English Rev. 7...

  • Page 280: When There's Too Much Leakage Current

    If later tests indicate high leakage currents, this should be suspected as a possible cause and the outlet wiring should be visually inspected. 10-32 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 281: Probe Fails

    If the leakage current measurement tests fail on a new Ultrasound system and if situation can not be corrected, submit a Safety Failure Report to document the Ultrasound system problem. Remove Ultrasound system from operation. Venue 50 – Basic Service Manual 10-33 5447566-100 English Rev. 7...

  • Page 282: Inspection Paperwork

    * Scan Format: Phased Array, Linear Array, Curved Array, Mechanical Array or Other Figure 10-6. Ultrasound Inspection Certificate * Scan Format: Phased Array, Linear Array, Curved Array, Mechanical Array or Other 10-34 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 283 Comments Probe 1: Probe 2: Probe 3: Final Check. All system covers are in place. System scans with all probes as expected. Accepted by: ______________________________________________________________________ Figure 10-8. Electrical Safety Venue 50 – Basic Service Manual 10-35 5447566-100 English Rev. 7...
  • Page 284 Care and Maintenance 10-36 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

  • Page 285: Index

    EMC, 1-26 customer assistance, 1-28 compliance, 1-26 phone numbers, 1-29 what is EMC?, 1-26 customer order EMI, 1-26 verification, 3-22 abatement, 2-9 prevention, 2-9 protection, 3-22 environmental dangers, 2-19 Venue 50 – Basic Service Manual Index-1 5447566-100 English Rev. 7...
  • Page 286 10-29 see "setup warnings", 3-3 probe maintenance, 10-15 introduction (chapter 1), 1-1 basic probe care, 10-15 basic probe cleaning, 10-16 probe related checks, 10-15 Index-2 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...
  • Page 287 1-8 statement certified electrical contractor statement, i-11 system specifications, 3-29 system checks, 10-12 system maintenance, 10-11 physical inspection, 10-14 preliminary checks, 10-11 system manufacturer, 1-29 system requirements verification, 3-29 Venue 50 – Basic Service Manual Index-3 5447566-100 English Rev. 7...
  • Page 288 Index-4 Venue 50 – Basic Service Manual 5447566-100 English Rev. 7...

This manual is also suitable for:

5452256544862355608515561656

Table of Contents