Omniview Main Menu - GE Voluson Swift Instructions For Use Manual

3D and 4D Mode

OmniView Main Menu

Preset Folder
VCI Thickness
Method
Ref. Plane A/Ref. Plane B/
Ref.Plane C
Calc Cine
Init
3D Contr.
3D Brightn.
Mix
Gray thresh.
8-20
Figure 8-12 OmniView RenderMode Conrtrols
Change the preset of the selected render group.
Select the desired thickness (mm).
Four tracking line methods are available:
•
Line : straight line
•
Curve : curved line
•
Trace : freeform line
•
Polyline : freeform line from point to point
Selection of Ref.Plane
Displays the Cine Calculations menu.
All existing lines are deleted and a new line entry is started.
Adjust the contrast.
Adjust the brightness.
Render mix mode: combine the two selected render modes and Gray Threshold low
for 3D images.
Displays the Gray Threshold.
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4