Saving An Image Archive; Loading An Image Archive - GE Voluson Swift Instructions For Use Manual

11.2.3.6.2 Image Archive

Saving an Image Archive

Note

Loading an Image Archive

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
1. Click Delete and the Delete window is displayed.
2. Choose the destination (e.g., HDD).
3. Click on the backup to be deleted (additional information is displayed in the table).
Delete and confirm with Yes to start the deletion process.
4. Click
The Image Archive contains all image data, measure data and patient data.
Save and the Save window is displayed.
1. Click
2. Check the check box
space and remove the backed up exams from your local hard disk.
3. Then choose the exams, you wish to backup. Choose a date from the drop-down list. All
exams from the last backup until the date you choose will be backed up.
4. Confirm with Next .
4.1. If you want to choose exams or patients arbitrarily, press
4.2.
Choose between
choose you can select patients or exams to save in your backup. It is also
possible to choose a singular patient or a singular exam.
•
4.3. To select or deselect a patient or an exam use the checkbox on the left
side of the screen.
•
Use
exams or patients or deselect them.
•
Include Selected : The selected patients will be saved.
•
Exclude Selected : The selected patients will no be saved.
It is possible to use the Shift key on the keyboard to select more than one patient!
4.4. After selecting the patients or exams you desire confirm with
5. Select a destination to save your backup to.
6. You can also enter a description for your backup: Click into the area designated for
Backup Description .
Next .
7. Confirm with
OK .
8. Confirm with
Yes and the saving procedure starts.
9. Confirm with
10. As soon as the saving procedure is finished confirm with
Image Archive tab.
Load and the Load window is displayed.
1. Click
2. Choose source drive.
3. Click on the file to be restored
Next and choose between Patient View and Exam View . Depending on
4. Confirm with
which view you choose you can select patients or exams to load from the archive. It is
also possible to choose a singular patient or a singular exam.
Remove Local Images after Backup , if you want to save hard disk
Patient View and Exam View . Depending on which view you
Select All or Deselect All below the information screen to select all
System Setup
Advanced .
Next .
OK . You will be returned to the
11-43