Edit Clip; Cine-Split Function; 2D Auto Cine - GE Voluson Swift Instructions For Use Manual

Image management

7.4.3 Edit Clip

7.4.4 Cine-Split Function

7.4.5 2D Auto Cine

Using 2D Auto Cine
7-14
After the cine has been stored it can be edited.
Enter the Edit Clip mode.
The stored cine clip can be cropped by defining a start and a end image:
Scroll through the images.
Define a start image.
Define a end image.
Exit the Edit Clip mode.
After Freeze of a sequence in Multi-format 2D mode, two or four different images of the
sequence can be displayed simultaneously in Dual or Quad display mode.
Using the [Format] keys you can change to the next (part of) frozen 2D image sequence to
play back the cine memory.
Note:
•
In Dual image mode 2D cine each image takes half of the memory as in Single mode.
•
In Quad image mode 2D cine each image takes only one quarter of the memory.
•
The Cine-Split function (multiple format) is also possible with 2D Auto Cine: 'Cine Mode'
on page 7-12
With the 2D Auto Cine function a defined sequence (start, end) of a 2D image can be
reviewed.
1. Store a 2D image.
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4