Volume Pre Mode; Volume Acquisition Modes - GE Voluson Swift Instructions For Use Manual

Image info
Light position icon

8.5 Volume Pre mode

2D/C(CFM)/PW/M
3D/4D sub menus :
VCI-OmniView/VCI-A/3D/4D/
Volumne Analysis
3D/4D User Programs
TGC
Init
Acoustic Output
Vol.Angle
Quality
3D CRI
Note
Note

8.6 Volume Acquisition Modes

Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Screen reference: 8
Caution
A lossy image compression can reduce image quality which can lead to a false diagnosis!
Screen reference: 9
The light position icon indicates the current position of the light source.
Opens 2D, C(CFM), PW or M Mode
Opens VCI-OmniView, VCI-A, 3D,4D or Volumne Anaylsis mode. One is always on
if 3D/4D button is pressed.
Settings
Selects the desired user program.
Opens the TGC slider
Sets all transitions and rotations back to the initial acquisition mode.
Adjusts the Acoustic Output
Adjusts the Volume Angle
This control improves the resolution by reducing the frame rate. Respectively it
reduces the resolution by increasing the images frame rate
Selection of the 3D CRI function independent from B-Mode imaging
It is available to control Focus Depth, Focus Zones Quality, Vol.Angle and TGC Curve with
touch gestures and guide lines.
It is available to control Gain and Focus Depth with Hard key.
Figure 8-4 Volume Pre mode
Controls
3D and 4D Mode
8-11