Navigating The Menus - Christie DS+5K User Manual

Section 3: Operation
3.3 Navigating the
Menus
3-10 User's Manual
Downloaded From projector-manual.com Christie Manuals
Lens
NOTE: Use the key (built-in keypad) with the general
Shift
same effect as if using the arrow keys related to "Lens V" or "Lens H" on the IR
remote.
Laser
Press to activate the laser pointer on the
remote. This feature is useful when making
presentations - just point the remote at the
screen to highlight an area of your presentation.
The closer you are to the screen the brighter the
laser beam appears. The laser pointer works best
in an environment where ambient lighting can
be controlled.
NOTE: Leave batteries in the wired remote keypad for the
Most of the controls for the
projector are accessed from
within the projector's menu
system. There are several groups
of related functions, with each
group selectable from the Main
menu as shown at right. Press
at any time to display this
Menu
Main menu.
On the remote keypad, either
enter the number corresponding
to the function menu you wish to
access, such as for the
2
Image Settings menu, or use the
option, then press . The corresponding function menu or pull-down list of further
options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option
number for any numbered option, or use the
option, then press (Enter). Extra long menus have a scroll bar on the right—use
the arrow keys to access the remainder of the menu. Locked items or items that do not
pertain to the current action or condition appear dimmed and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are
disabled. 2) After 15 minutes of inactivity, the projector leaves the menu system and
returns to the presentation. 3) The Status menu is read-only.
When finished with a function menu, do one of the following:
•
Press to return to the previous screen
Exit
•
Press to leave the menu system and return to the presentation
Menu
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
LASER DIODE
CLASS II LASER PRODUCT
key to work.
keys on any keypad to highlight the desired
keys to highlight the desired
keys to get the
Wavelength 670nm
Max Output 1mW