Navigating The Menus - Christie HAL Series User Manual

OPERATION
3.4 Navigating
the Menus
3-10
DLV 1280
User's Manual
Select either the or
frequency of the pixel sampling clock to match the input signal. Pixel tracking
may need adjustment when your image is stretched or compressed (assuming it is
sized correctly) and exhibits soft vertical bars of noise. See 3.6, Adjusting the
Image (Image Size & Position subsection).
NOTE: Remote keypads only.
Select either the or
phase of the pixel sampling clock so that any shimmer disappears and the image
is stable. See 3.6, Adjusting the Image (Image Size & Position subsection).
For continuous automatic adjustment, press
and an " " will appear in the menu to signify that the projector has selected the
correct phase setting for the current display. To toggle auto phase off, press
again.
NOTES: 1) This key is on remote keypads only. 2) Pixel Tracking must be
correct in order for Pixel Phase to work.
At presentation level, press
off. A small "MUTE" message will appear until you cancel (press
If a menu is visible, press
continue adjustments as usual with the arrow keys while displaying only the
image. To cancel mute and return to the normal menu display, press any key
other than the right or left arrow keys, or
If you are hiding the menus (i.e., you entered the menu system "blindly" with
), press or
Press if you want to enlarge (zoom in on) only a portion of the image, such
as extremely small text or some sort of detail. Each press of
through the zoom factors of
(tripled). Use the arrow keys to move the portion you want to see into view.
Press for detailed information about any current menu and highlight. Press
again to exit. From presentation level, press
menu consisting Using Help, Setup, Keys, Source Selection and Status and
Power LEDs. Press
Most of the controls for the projector are accessed from within the DLV 1280
menu system, consisting of a main menu from which eight function menus and
other options stem. See Appendix C for the complete DLV 1280 menu tree.
"Pixel Track" key to begin increasing or decreasing the
"Pixel Phase" key to begin increasing or decreasing the
to toggle audio from the current source on or
(or on the built-in keypad) to hide it. You can
or
to re-display the menus.
(normal state of image),
to exit and return to presentation level.
. The phase value will change
or
.
will scroll
(doubled) and
to access the General Help
).