Navigating The Cdp Menus; Navigation Icons - Christie CP2000-M Setup Manual

Hide thumbs Also See for CP2000-M:
Table of Contents

Advertisement

Section 2: Basic Operation
• If the back light turns OFF, push any key to turn it ON again.

2.4.2 Navigating the CDP Menus

Most basic controls of the projector are accessed from within
the projector's menu system. There are several groups of
related functions, with each group selectable as a menu item in
the Main menu (Figure 2-3). Press
display the Main menu. With the Main menu displayed, use
the arrow keys to highlight the desired option, then press
to make the selection. The corresponding function menu or
pull-down list containing further options will appear. Extra
long menus are indicated by a small arrow in the bottom right
corner of the display. To scroll through a list of items, use the
down arrow key. Once past the 4 line limit of the display,
another arrow appears in the upper-left corner to allow
scrolling of the menu in both directions. Press
return to the previous level of options.

Navigation Icons

Additional menu items available, press
Menu option is enabled (ON).
Menu option is disabled (OFF).
Various status icons are used in the CDP display to convey projector status. With the exception of the
status icon, all other CDP icons appear on the display as the functions are enabled or disabled.
Status Icon: Appears in the upper-right corner of the CDP display to indicate communication
status. When flashing, active communication is taking place. When solid, it can mean communication
is temporarily stalled (i.e., too many keypresses entered at a time) or communication with the projector
has failed.
Service Icon: Appears whenever the following functions are ON: Lamp Change, Lamp
Rotation or Filter Change. NOTE: By default, lamp rotation is disabled.
Power Icon: Appears when power to the projector is in POWER ON mode (not in STANDBY).
Error Icon: Appears whenever a critical error occurs.
Lamp ON Icon: Appears when the lamp is ON.
Lamp OFF Icon: Appears when the lamp is OFF.
Douser Open Icon: Appears when the douser is OPEN.
Douser Closed Icon: Appears when the douser is CLOSED.
2-6
at any time to
MENU
ENTER
once to
EXIT
to view.
ENTER
F
2-3 M
M
IGURE
AIN
ENU
CP2000-M/MR Setup Guide
020-100205-03 Rev. 1 (05/09)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp2000-mr

Table of Contents