Table of Contents
Advertisement
L2SWITCH#show mirror
Mirror Configurations:
State
: Disabled.
Monitor port : 9.
Ingress port(s): 1-8.
Egress port(s) : None.
5.3.2.
Web Configuration
Parameter
Description
Port Mirroring Settings
Select Enable to turn on port mirroring or select Disable to turn it
State
off.
Monitor to Port
Select the port which connects to a network traffic analyzer.
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same for all
All Ports
ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
Source Port
This field displays the number of a port.
Select Ingress, Egress or Both to only copy the ingress (incoming),
egress (outgoing) or both (incoming and outgoing) traffic from the
Mirror Mode
specified source ports to the monitor port. Select Disable to not copy
any traffic from the specified source ports to the monitor port.
53
Advertisement
Table of Contents
