General Settings; Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

IGMP snooping on the Switch is disabled even per VLAN states are enabled. When the global
state is enabled, user must enable per VLAN states to enable the IGMP Snooping on the specific
VLAN.

6.2.1.1 General Settings

6.2.1.1.1 CLI Configuration

Node
enable show igmp-snooping
enable show igmp-snooping counters
enable configure terminal
configure clear igmp-snooping counters
configure igmp-snooping (disable | enable)
configure igmp-snooping report-
suppression (disable|enable)
configure igmp-snooping vlan VLANID
configure no igmp-snooping vlan VLANID
configure igmp-snooping unknown-
multicast (drop|flooding)
Example:
L2SWITCH(config)#igmp-snooping enable
L2SWITCH(config)#igmp-snooping vlan 1
Command
78
Description
This command displays the current IGMP
snooping configurations.
This command displays the current IGMP
snooping counters.
This command changes the node to
configure node.
This command clears all of the IGMP
snooping counters.
This command disables / enables the IGMP
snooping on the switch.
This command disables / enables the IGMP
snooping report suppression function on the
switch.
This command enables the IGMP snooping
function on a VLAN or range of VLANs.
This command disables the IGMP snooping
function on a VLAN or range of VLANs.
This command configures the process for
unknown multicast packets when the IGMP
snooping function is enabled.
drop: Drop all of the unknown multicast
packets.
flooding: Flooding the unknown multicast
packets to all ports.