Web Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

7.3.2.2 Web Configurations

Parameter
Port Settings
Port
802.1x State
Admin Control
Direction
Re-authentication
Description
Select a port number to configure.
Select Enable to permit 802.1x authentication on the port.
You must first enable 802.1x authentication on the Switch
before configuring it on each port.
Select Both to drop incoming and outgoing packets on the port
when a user has not passed 802.1x port authentication.
Select In to drop only incoming packets on the port when a user
has not passed 802.1x port authentication.
Specify if a subscriber has to periodically reenter his or her user
name and password to stay connected to the port.
277