Tag Settings; Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.3.2.2 Tag Settings

6.3.2.2.1 CLI Configuration

Node
enable show vlan
enable show vlan <1-4094>
enable configure terminal
configure vlan <1~4094>
vlan show
vlan add PORTLISTS
vlan tagged PORTLISTS
vlan no tagged PORTLISTS
vlan Untagged PORTLISTS
vlan no untagged PORTLISTS
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#vlan 2
L2SWITCH(config-vlan)#fixed 1-6
L2SWITCH(config-vlan)#tagged 1-3
Command
114
Description
This command displays all of the VLAN
configurations.
This command displays the VLAN
configurations.
This command changes the node to configure
node.
This command enables a VLAN and enters the
VLAN node.
This command displays the current VLAN
configurations.
This command adds a port or a range of ports
to the VLAN.
This command assigns ports for tagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
VLAN.
This command removes all tagged member
from the VLAN.
This command assigns ports for untagged
member of the VLAN group. The ports should
be one/some of the permanent members of the
VLAN.
This command removes all untagged member
from the VLAN.