Maintenance; Configuration; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.4 Maintenance

9.4.1 Configuration

9.4.1.1 CLI Configurations

Node
enable configure terminal
configure write memory
configure archive download-config
<URL PATH>
configure archive upload-config <URL
PATH>
configure archive download-running-
config <URL PATH>
configure reload default-config
configure archive download-config
URL_PATH user-default-
config
configure copy factory-default-config to
user-default-config
configure copy startup-config to user-
default-config
There are three configuration files:
startup-config.

user-default-config.

factory-default-config.

When users execute the command, write memory, the system will save all of the running

configurations to startup-config file.
When the Switch boot up, it will load startup-config as the system configurations.

When users execute the command, reload default-config, the system will copy user-

default-config to startup-config.
Command
320
Description
This command changes the node to configure
node.
This command writes current operating
configurations to the configuration file.
This command downloads a new copy of
configuration file to replace the startup-config
from TFTP server.
Where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
This command uploads the current startup-
config configurations file to a TFTP server.
This command downloads a new copy of
running configuration file from TFTP server.
Where <URL PATH> can be:
ftp://user:pass@192.168.1.1/file
http://192.168.1.1/file
tftp://192.168.1.1/file
This command copies a user-default-config
file to replace the startup-config file.
Note: The system will reboot automatically to
take effect the configurations.
This command downloads configure file to
user-default-config.
This command copies factory-default-config
file to user-default-config file.
This command copies the startup-config file
to user-default-config file.