Snmpv3; Group Settings; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.1.3 SNMPv3

9.1.3.1 Group Settings

9.1.3.1.1 CLI Configurations

Node Command
enable show snmp group
enable configure terminal
snmp group GROUPNAME
configure noauth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure auth (read STRINGS write
STRINGS notify STRINGS)
snmp group GROUPNAME
configure priv (read STRINGS write
STRINGS notify STRINGS)
configure no snmp group GROUPNAME
Description
This command displays all snmp v3 groups.
This command changes the node to configure
node.
Configures v3 group of non- authentication.
Configures v3 group of authentication.
Configures v3 group of authentication and
encryption.
This command removes a v3 group from
switch.
307