Static Mac; Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

5.2.1.

Static MAC

5.2.1.1. CLI Configuration

Node Command
enable show mac-address-table
(static|dynamic)
enable configure terminal
configure mac-address-table static
MACADDR vlan
4094> port PORT_ID
configure no mac-address-table
static MACADDR vlan
<1-4094>
Example:
L2SWITCH(config)#mac-address-table static 00:11:22:33:44:55 vlan 1 port 1

5.2.1.2. Web Configuration

A static Media Access Control (MAC) address is an address that has been manually entered in
the MAC address table, and do not age out. When you set up static MAC address rules, you are
setting static MAC addresses for a port, so this may reduce the need for broadcasting.
Parameter
Static MAC Settings
MAC Address
VLAN ID
This command displays the current static/dynamic
unicast address entries.
This command changes the node to configure node.
This command configures a static unicast entry.
<1-
This command removes a static unicast entry from
the address table.
Description
Enter the MAC address of a computer or device that you want to add
to the MAC address table.
Valid format is hh:hh:hh:hh:hh:hh.
Enter the VLAN ID to apply to the computer or device.
45
Description