configure
interface IFNAME
interface
arp-inspection trust
interface
no arp-inspection
trust
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#arp-inspection enable
L2SWITCH(config)#arp-inspection vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#arp-inspection trust
7.1.3.1.2 Web Configurations
Parameter
ARP Inspection Settings
State
VLAN State
Trusted Ports
This command enters the interface configure node.
This command configures the trust port for the specific
port.
This command configures the un-trust port for the
specific port.
Description
Use this to Enable or Disable ARP inspection on the Switch.
Enter the VLAN IDs you want the Switch to enable ARP Inspection
for. You can designate multiple VLANs individually by using a
comma (,) and by range with a hyphen (-).
Select the ports which are trusted and deselect the ports which are
261