Jumbo Frame; Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

5.1.2.

Jumbo Frame

Jumbo frames are Ethernet frames with a payload greater than 1500 bytes. Jumboframes can
enhance data transmission efficiency in a network. The bigger the frame size, the better the
performance.
Notice:
The default jumbo frame is 10240 bytes.

The jumbo frame settings will apply to all ports.

If the size of a packet exceeds the jumbo frame size, the packet will be dropped.

The available values are 1522, 1536, 1552, 9010, 9216,10240.


5.1.2.1. CLI Configuration

Node
enable show jumboframe
enable configure terminal
configure interface IFNAME
interface jumboframe(10240|1522|1536|1
552|9010|9216)
configure interface range
gigabitethernet1/0/PORTLISTS
if-range jumboframe(10240|1522|1536|1
552|9010|9216)

5.1.2.2. Web Configuration

Command
37
Description
This command displays the current jumbo
frame settings.
This command changes the node to configure
node.
This command enters the interface configure
node.
This command configures the maximum
number of bytes of frame size.
This command enters the if-range configure
node.
This command configures the maximum
number of bytes of frame size.