Adding Primary Domain: This command is used to add specified domain ID as primary
domain in PTP; By default primary domain ID is 0.
L2SWITCH(config)#ptp primary-domain 1
Deleting Primary Domain: This command is used to delete existing primary domain ID from
PTP and adds default domain ID (0) as primary domain ID.
L2SWITCH(config)#no ptp primary-domain
6.11.5.2 Web Configuration
Parameter
PTP Settings
PTP State
Domain ID
Primary Domain
Apply
Refresh
Description
Enables / Disables the global PTP state.
Creates / Removes a Domain.
Configure the primary domain.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
190