Gvrp; Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

Default Settings
The default port Join Time is 20 for all ports.
The default port Leave Time is 60 for all ports.
The default port Leave-all Time is 1000 for all ports.
The default port Hold Time is 10 for all ports.

6.3.3.1 GVRP

6.3.3.1.1 CLI Configuration

Node Command
enable show gvrp
configuration
enable show gvrp statistics
enable configure terminal
configure gvrp (disable|enable)
configure no gvrp configuration
configure interface IFNAME
interface gvrp (disable|enable)
interface gvrp registration
(normal|forbidden)
interface no gvrp configuration

6.3.3.1.2 Web Configuration

Description
This command displays the GVRP configurations.
This command displays the GVRP configurations on a
port or all ports.
This command changes the node to configure node.
This command disables / enables the GVRP on the
switch.
This command set GVRP configuration to its defaults.
This command enters the interface configure node.
This command disables / enables the GVRP on the
specific port.
This command configures the registration mode for the
GVRP on the specific port.
This command set GVRP configuration to its defaults
for the specific port.
119