Reboot; Cli Configurations; Web Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.4.3 Reboot

9.4.3.1 CLI Configurations

Node Command
enable configure terminal
configure reboot

9.4.3.2 Web Configurations

Reboot allows you to restart the Switch without physically turning the power off.
Follow the steps below to reboot the Switch.
In the Reboot screen, click the Reboot button. The following screen displays.

Click OK again and then wait for the Switch to restart. This takes up to two minutes. This

does not affect the Switch's configuration.
Description
This command changes the node to configure node.
This command reboots the system.
325