Ring; Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.7.1 Ring

6.7.1.1 CLI Configuration

Node Command
enable show erps
enable configure terminal
configure erps enable
configure no erps enable
configure erps ring-id <1-255>
configure no erps ring-id <1-255>
erps-ring show
erps-ring control-vlan <1-4094>
erps-ring guard-timer <10-2000>
erps-ring holdoff-timer <0-10000>
erps-ring left-port PORTID type
[owner|neighbor|normal]
erps-ring mel <0-7>
erps-ring name STRING
erps-ring revertive
erps-ring no revertive
erps-ring right-port PORTID type
[owner|neighbor|normal]
erps-ring ring enable
erps-ring no ring enable
erps-ring version (v1|v2)
erps-ring wtr-timer <5-720>
erps-ring enhance left-port
erps-ring enhance right-port
erps-ring no enhance left-port
erps-ring no enhance right-port
Description
This command displays the ERPS configurations.
This command changes the node to configure node.
This command enables the global ERPS on the
Switch.
This command disables the global ERPS on the
Switch.
This command creates an ERPS ring and its ID and
enter ERPS node.
This command creates an ERPS ring and enter ERPS
node to configure detail ring configurations.
This command displays the configurations of the
ring.
This command configures a control-vlan for the
ERPS ring.
This command configures the Guard Timer for the
ERPS ring. (default:500ms)
This command configures the Hold-off Timer for the
ERPS ring. (default:0 ms)
This command configures the left port and type for
the ERPS ring.
This command configures a Control MEL for the
ERPS ring.
This command configures a name for the ERPS ring.
This command configures the revertive mode for the
ERPS ring.
This command configures then on-revertive mode for
the ERPS ring.
This command configures the right port and type for
the ERPS ring.
This command enables the ring.
This command disables the ring.
This command configures a version for the ERPS
ring.
This command configures the WTR Timer for the
ERPS ring. (default: 5 minutes)
This command enables the left port enhance mode.
This command enables the right port enhance mode.
This command disables the left port enhance mode.
This command disables the right port enhance mode.
158