Port Settings; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

7.3.2 Port Settings

7.3.2.1 CLI Configurations

Node
enable show dot1x
enable configure terminal
configure interface IFNAME
interface dot1x admin-control-direction
(both|in)
interface dot1x default
interface dot1x max-req <1-10>
interface dot1x port-control (auto|force-
authorized|force-unauthorized)
interface dot1x authentication (disable|enable) This command enables/disables the 802.1x
interface dot1x reauthentication
(disable|enable)
interface dot1x timeout quiet-period
interface dot1x timeout server-timeout
interface dot1x timeout reauth-period
interface dot1x timeout supp-timeout
interface dot1x guest-vlan (disable|enable)
Command
276
Description
This command displays the current 802.1x
configurations.
This command changes the node to
configure node.
This command enters the interface
configure node.
This command configures the control
direction for blocking packets.
This command sets the port configuration to
default settings.
This command sets the max-req times for
the port.
This command configures the port control
mode on the port.
authentication on the port.
This command enables/disables re-
authentication on the port.
This command configures the quiet-period
value on the port.
This command configures the server-
timeout value on the port.
This command configures the reauth-period
value on the port.
This command configures the supp-timeout
value on the port.
This command disables / enables guest
VLAN on the port.