Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

configure no pppoe intermediate-agent
format-type user-defined
configure no pppoe intermediate-agent
vlan
configure no pppoe intermediate-agent
vlan VLANLISTS
configure no pppoe intermediate-agent
circuit-id-vlan
configure no pppoe intermediate-agent
circuit-id-vlan VLANLISTS
configure no pppoe intermediate-agent
remote-id-vlan
configure no pppoe intermediate-agent
remote-id-vlan VLANLISTS
Example:
L2SWITCH(config)#pppoe intermediate-agent enable
L2SWITCH(config)#pppoe intermediate-agent vlan 1-100,200,300
L2SWITCH(config)#pppoe intermediate-agent circuit-id-vlan 1-100,200,300
L2SWITCH(config)#pppoe intermediate-agent remote-id-vlan 1-100,200,300
L2SWITCH(config)#pppoe intermediate-agent format-type user-defined
%HOSTNAME+%SPACE+atm+%SPACE+/0/0/+%PORT+:+%CVLAN

6.12.1.2 Web Configuration

This no command removes the user defined
circuit ID for the PPPoE IA.
This no command disablePPPoE IA on all
VLANs.
This no command disables thePPPoE IA on
specific VLANs.
This no command disables the PPPoE
IAcircuit-idon all VLANs.
This no command disables thePPPoE
IAcircuit-idon specific VLANs.
This no command disables thePPPoE
IAremote-idon all VLANs.
This no command disables thePPPoE
IAremote-idon specific VLANs.
202