Web Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

7.1.2.1.2 Web Configurations

Parameter Description
Static Entry Settings
MAC Address Enter the source MAC address in the binding.
IP Address Enter the IP address assigned to the MAC address in the binding.
VLAN ID Enter the source VLAN ID in the binding.
Port Specify the port in the binding.
Click Apply to configure the settings.
Apply
Click Refresh to begin configuring this screen afresh.
Refresh
Static Binding Table
This field displays a sequential number for each binding. Click it to
No.
update an existing entry.
MAC Address This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the
IP Address
binding.
Lease (Hour) This field displays how long the binding is valid.
VLAN This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding.
This field displays how the Switch learned the binding.
Type
Static: This binding was learned from information provided
257