Domain Settings; Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

PTP Status
PTP Status The current global PTP state.
PTP Primary
Configure the primary domain.
Domain
Domain ID Creates / Removes a Domain.
Domain Status The current state of the domain.
Slave The current slave mode of the domain.
Path Trace The current path track mode of the domain.
The current clock mode of the domain.
Clock
The current Two Step clock mode of the domain.
Two Step Clock
The priority of the clock 1
Clock Priority_1
The priority of the clock priority2 of the domain.
Clock Priority_2
Acceptable Master The priority of the acceptable master of the domain.
Priority

6.11.6 Domain Settings

6.11.6.1 CLI Configuration

Node
Enable show ptp domain
<Domain-ID>
enable configure terminal
configure ptp primary-domain
<Domain-ID>
configure no ptp primary-domain
configure ptp domain <Domain-
ID>
configure no ptp domain <Domain-
ID>
ptp_config domain enable
ptp_config no domain enable
ptp_config clock-mode
<ordinary|boundary|trans
parent|forward>
ptp_config no clock-mode
st
Command
This command displays specified PTP domain
configurations.
This command changes the node to configure
node.
This command configures a specified Domain
ID as the PTP's primary domain.
This command resets the primary domain ID
default domain ID (0).
This command creates a specified domain in
PTP.
This command deletes a specified domain ID
from PTP.
This command enables the PTP domain.
This command disables PTP domain.
This command assigns specified clock mode
in PTP domain.
This command deletes existing clock mode of
191
priority of the domain.
Description