Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.3.2.3.2 Web Configuration

Parameter Description
Port Settings
Select a port number to configure from the drop-down box.
Port
Select All to configure all ports at the same time.
PVID Select a PVID (Port VLAN ID number) from the drop-down box.
Specify the type of frames allowed on a port. Choices are All, VLAN
Untagged Only or VLAN Tagged Only.
- Select All from the drop-down list box to accept all untagged or
tagged frames on this port. This is the default setting.
Acceptable Frame
- Select VLAN Tagged Only to accept only tagged frames on this
port. All untagged frames will be dropped.
- Select VLAN Untagged Only to accept only untagged frames on this
port. All tagged frames will be dropped.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
117