Server Control; Cli Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.4.4 Server Control

The function allows users to enable or disable the SSH or Telnet or Web service individual using
the CLI or GUI.

9.4.4.1 CLI Configurations

Node Command
enable show server status
enable configure terminal
configure http server
configure no http server
configure http server port
VALUE
configure no http server port
configure https server
configure no https server
configure ssh server
configure no ssh server
configure telnet server
configure no telnet server
configure telnet server port
VALUE
configure no telnet server port
Description
This command displays the current server status.
This command changes the node to configure node.
This command enables the http on the Switch.
This command disables the http on the Switch.
This command configures the TCP port for the HTTP
server.
This command resets the HTTP TCP port to 80.
This command enables the https on the Switch.
This command disables the https on the Switch.
This command enables the ssh on the Switch.
This command disables the ssh on the Switch.
This command enables the telnet on the Switch.
This command disables the telnet on the Switch.
This command configures the TCP port for the TELNET
server.
This command resets the TELNET TCP port to 23.
326