Port Trap Event; Cli Configurations; Web Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.1.2.3 Port Trap Event

The features allow users to enable/disables port-link-change trap notification by individual port.

9.1.2.3.1 CLI Configurations

Node
enable show snmp port-link-change-trap
enable configure terminal
configure interface IFNAME
interface snmp port-link-change-trap
interface no snmp port-link-change-trap
configure interface range
gigabitethernet1/0/PORTLISTS
if-range snmp port-link-change-trap
if-range no snmp port-link-change-trap

9.1.2.3.2 Web Configurations

Command
305
Description
This command displays the SNMP port
link-change trap configurations.
This command changes the node to
configure node.
This command enters the interface
configure node.
This command enables the link change
trap on the specific port.
This command disables the link change
trap on the specific port.
This command enters the if-range
configure node.
This command enables the link change
trap on the specific ports.
This command disables the link change
trap on the specific ports.