Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.1.1.2.1 CLI Configuration

Node Command
enable show diffserv
enable configure terminal
configure diffserv
(disable|enable)
configure diffserv dscp <0-63>
priority <0-7>

6.1.1.2.2 Web Configuration

Parameter Description
DSCP Settings
"Tag Over DSCP" or "DSCP Over Tag". "Tag Over DSCP" means the
Mode
802.1p tag has higher priority than DSCP.
This field displays each priority level. The values range from 0 (lowest
Priority
priority) to 7 (highest priority).
Description
This command displays DiffServ configurations.
This command changes the node to configure node.
This command disables / enables the DiffServ
function.
This command sets the DSCP-to-IEEE 802.1q
mappings.
67