Usb Function; Cli Configurations; Web Configurations - Tripp Lite NGI-M08POE8-L2 Owner's Manual

9.6 USB Function

The USB Function is used on a network switch for automatic execution of tasks, such as
firmware upgrade, download configurations and system log.

9.6.1 CLI Configurations

Node Command
enable show usb status
enable configure terminal
configure usb auto-upgrade-fw
(disable|enable)
configure usb auto-download-
config (disable|enable)
configure usb auto-download-
syslog (disable|enable)
Example:
L2SWITCH#show usb status

USB auto upgrade firmware State
USB auto download config State
USB auto download syslog State
L2SWITCH#configure terminal

L2SWITCH(config)#usb auto-upgrade-fw enable

L2SWITCH(config)#usb auto-download-config enable

L2SWITCH(config)#usb auto-download-syslog enable


9.6.2 Web Configurations

Description
This command displays the current USB function
configurations.
This command changes the node to configure node.
This command disables / enables the USB upgrade
firmware automatically.
This command disables / enables the USB
download configuration file automatically..
This command disables / enables the USB
download syslog file automatically.
: Enabled
: Enabled
: Enabled
330