Action
7.1.2.2 Binding Table
Bindings are used by DHCP snooping and ARP inspection to distinguish between authorized and
unauthorized packets in the network. The Switch learns the dynamic bindings by snooping DHCP
packets and from information provided manually in the Static Entry Settings screen.
7.1.2.2.1 CLI Configurations
Node
enable
show dhcp-snooping binding
7.1.2.2.2 Web Configurations
Parameter
Description
DHCP Snooping Binding Table
MAC Address
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the
IP Address
binding.
Lease
This field displays how long the binding is valid.
VLAN
This field displays the source VLAN ID in the binding.
This field displays the port number in the binding. If this field is blank,
Port
the binding applies to all ports.
manually by an administrator.
Dynamic: This binding was learned by snooping DHCP packets.
Click Delete to remove the specified entry.
Command
258
Description
This command displays the current DHCP
snooping binding table.